| Allicdata Part #: | P56KW-3TR-ND |
| Manufacturer Part#: |
ERG-3SJ563A |
| Price: | $ 0.05 |
| Product Category: | Resistors |
| Manufacturer: | Panasonic Electronic Components |
| Short Description: | RES 56K OHM 3W 5% AXIAL |
| More Detail: | 56 kOhms ±5% 3W Through Hole Resistor Axial Flame ... |
| DataSheet: |  ERG-3SJ563A Datasheet/PDF |
| Quantity: | 6000 |
| 1500 +: | $ 0.04694 |
| 3000 +: | $ 0.04401 |
| 7500 +: | $ 0.03961 |
| 10500 +: | $ 0.03873 |
| 37500 +: | $ 0.03741 |
| 75000 +: | $ 0.03668 |
| Series: | ERG |
| Packaging: | Tape & Reel (TR) |
| Part Status: | Active |
| Resistance: | 56 kOhms |
| Tolerance: | ±5% |
| Power (Watts): | 3W |
| Composition: | Metal Oxide Film |
| Features: | Flame Proof, Safety |
| Temperature Coefficient: | ±300ppm/°C |
| Operating Temperature: | -55°C ~ 235°C |
| Package / Case: | Axial |
| Supplier Device Package: | Axial |
| Size / Dimension: | 0.217" Dia x 0.591" L (5.50mm x 15.00mm) |
| Height - Seated (Max): | -- |
| Number of Terminations: | 2 |
| Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors are an important part of electronic components. One of the most common through hole Resistors is ERG-3SJ563A. This electronic component is widely used in the industry for its simple construction, high efficiency, and excellent performance.
The ERG-3SJ563A is a non-inductive, through-hole resistor that consists of a ceramic, resistor body and two stainless steel terminals. The resistor body is made with high temperature alumina and comes in five different wattages. It is capable of withstanding up to five watts of power. It is also rated for continuous operation in temperatures up to 250 degrees Celsius.
The main application of the ERG-3SJ563A is in the electronics industry. This part is used for a range of different applications, from powering motherboards and drives to controlling switching relays and providing general-purpose control. It can also be used in analog circuits, providing a stable, non-inductive current. Additionally, it can be used to provide signal isolation and buffering, as well as attenuation.
The working principle of the ERG-3SJ563A is based on the same principle used by most through hole resistors: a resistor body is placed inside a metal can to provide electrical insulation between the two contacts. The contacts are then connected to the power supply, usually via a through hole for convenience. When the current passes through the resistor body, it is reduced by its resistance, resulting in a lower voltage and current level. The resistance value of the resistor is determined by the size of the resistor, its material, and its value.
Due to its robust construction and reliable performance, the ERG-3SJ563A is one of the most commonly used through hole resistors. It is widely used in a range of applications, from medical electronics to consumer electronics. Its simple construction and low cost make it a suitable choice for a range of electronic projects. It is also relatively easy to find, with a wide range of online retailers offering it for purchase.
The specific data is subject to PDF, and the above content is for reference
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...