Allicdata Part #: | P1.8KW-2TR-ND |
Manufacturer Part#: |
ERG-2SJ182A |
Price: | $ 0.03 |
Product Category: | Resistors |
Manufacturer: | Panasonic Electronic Components |
Short Description: | RES 1.8K OHM 2W 5% AXIAL |
More Detail: | 1.8 kOhms ±5% 2W Through Hole Resistor Axial Flame... |
DataSheet: | ERG-2SJ182A Datasheet/PDF |
Quantity: | 18000 |
3000 +: | $ 0.02176 |
6000 +: | $ 0.01978 |
15000 +: | $ 0.01846 |
30000 +: | $ 0.01754 |
75000 +: | $ 0.01718 |
150000 +: | $ 0.01681 |
Series: | ERG |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Resistance: | 1.8 kOhms |
Tolerance: | ±5% |
Power (Watts): | 2W |
Composition: | Metal Oxide Film |
Features: | Flame Proof, Safety |
Temperature Coefficient: | ±350ppm/°C |
Operating Temperature: | -55°C ~ 235°C |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.157" Dia x 0.472" L (4.00mm x 12.00mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors are an important component of many electrical and electronic applications. ERG-2SJ182A is an example of such a resistor. This resistor is a through hole version of the SMT type resistor using a new SMT technology. It has small footprint and low profile. The ERG-2SJ182A is a specialized low-power resistor used in high frequency applications.
The ERG-2SJ182A is used in a variety of applications, including RF and microwave circuits, telecom related applications, audio and video applications, and power supplies. The resistor has a resistance tolerance of 5%, which makes it suitable for high frequency applications. The ESR value is low and stable over a wide temperature range. The resistor has good solderability and is highly reliable.
The ERG-2SJ182A through hole resistor is designed to be mounted directly onto printed circuit boards (PCBs). The resistor has a built-in termination which helps reduce the risk of thermal runaway. It also has a self-aligning solder joint which improves the wave soldering process. The component also has a good static and dynamic performance which is suitable for high frequency applications.
The working principle of the ERG-2SJ182A through hole resistor is based on Ohm\'s law, which states that the current through a conductor is inversely proportional to the total resistance of the circuit. The resistor has a fixed value of resistance, and so the current through it will be inversely proportional to the voltage applied across it. This allows the resistor to control the current in a circuit.
The ERG-2SJ182A through hole resistor is a cost-effective and reliable solution for high frequency applications. It is designed to offer low thermal resistance and low ESR values, and can be used in a wide variety of applications. The resistor has a long lifespan and is highly reliable, which makes it suitable for a range of applications, including linear regulation, RF applications and power supplies.
The specific data is subject to PDF, and the above content is for reference
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...