AP1509-12SL-13

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The AP1509-12SL-13 is a high-efficiency step-down DC/DC switching regulator with a maximum efficiency of up to 95%. It is specifically designed for use in adapter and other applications requiring low noise and high efficiency. The regulator features a fixed PWM frequency of 2MHz, wide input voltage range of 2V to 16V, adjustable output voltage range of 0.8V to 11V, adjustable output current of up to 2A, and logic shutdown current of 0.1uA.

The AP1509-12SL-13 combines a high performance and low noise PWM step-down converter with low dropout linear regulator. This allows the AP1509-12SL-13 to provide high efficiency and low noise performance while suppressing power supply/load noise coupling. The linear regulator output can be disabled by the pin to reduce system power consumption in no load/light load conditions. The thermal protection circuit and over current protection can protect the chip and other components from damage. The chip also has an internal soft-start circuit, which can reduce the inrush current during start up and protect the power supply.

The working principle of the AP1509-12SL-13 is that it uses a buck converter to convert the input voltage to an adjustable output voltage. The input voltage is first converted to a higher voltage through a boost converter, and then this high voltage is converted to the output voltage using the buck converter. The buck converter utilizes pulse width modulation (PWM) to achieve the required voltage conversion. In this way, the voltage is maintained at the desired value, even if the input voltage changes. The switching frequency of the AP1509-12SL-13 is set at 2MHz, and when the output voltage changes, the duty cycle of the PWM signal is adjusted accordingly.

The AP1509-12SL-13 is ideally suited for a variety of applications such as adapters, battery chargers, power supplies, portable audio players, and other DC/DC applications where high efficiency, low noise, and small size are required. It can be used to regulate the power output of a power supply or to convert high voltage to low voltage. The adjustable output voltage and current are convenient for applications needing different output voltages or currents. Since the AP1509-12SL-13 has a low dropout linear regulator, it can reduce power supply noise and ensure a stable output voltage. In addition, the thermal protection and over current protection help to protect the chip and other components from damage. Thus, the AP1509-12SL-13 is a reliable and efficient solution for various DC/DC applications.

The specific data is subject to PDF, and the above content is for reference