Allicdata Part #: | S-8333ACFC-T8T1G-ND |
Manufacturer Part#: |
S-8333ACFC-T8T1G |
Price: | $ 0.46 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | ABLIC U.S.A. Inc. |
Short Description: | IC REG CTRLR BOOST 8TSSOP |
More Detail: | Boost Regulator Positive Output Step-Up DC-DC Con... |
DataSheet: | S-8333ACFC-T8T1G Datasheet/PDF |
Quantity: | 1000 |
3000 +: | $ 0.40837 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Not For New Designs |
Output Type: | Transistor Driver |
Function: | Step-Up |
Output Configuration: | Positive |
Topology: | Boost |
Number of Outputs: | 1 |
Output Phases: | 1 |
Voltage - Supply (Vcc/Vdd): | 1.8 V ~ 6 V |
Frequency - Switching: | 280kHz ~ 1.08MHz |
Duty Cycle (Max): | 89% |
Synchronous Rectifier: | No |
Clock Sync: | No |
Serial Interfaces: | -- |
Control Features: | Current Limit, Frequency Control |
Operating Temperature: | -40°C ~ 85°C (TA) |
Package / Case: | 8-TSSOP (0.173", 4.40mm Width) |
Supplier Device Package: | 8-TSSOP |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The S-8333ACFC-T8T1G is a voltage regulator DC/DC switching controller. It is designed to regulate the voltage output from a DC power supply, allowing for more precise and consistent levels than regular linear regulators. Switched mode power supplies are more efficient and able to adjust their output voltage in response to changes in load. This can be beneficial when operating with devices that require different voltages.
This particular chip is an 8-pin integrated circuit, featuring an operating frequency of 63kHz, a minimum switch-on/off time of 90ns, and an output current rating of 1.5A. It is also able to maintain a constant output voltage of up to 5.5V, with a ripple voltage of 50mV maximum at 12V input. It can also provide a soft start up of 0.5ms, as well as internal over-temperature protection, and is designed to work within a wide temperature range of -40C to +125C.
This DC/DC converter controller chip is ideal for applications that require a precise and consistent voltage regulation. It can be used in a variety of electronics, including mobile phones and laptops, televisions and DVD players, gaming consoles, and even medical devices. It is also suitable for automotive applications, as it is designed to work efficiently in extreme temperatures, and with fluctuating loads.
The S-8333ACFC-T8T1G working principle is based on pulse-width modulation (PWM). PWM works by converting a digital signal into an analog signal, which is then used to control the output voltage. The chip is connected to a power source and a load source. When the load increases, the chip reduces the time that the power source is on, thus decreasing the output voltage. The chip then adjusts the time that the power source is on, thus again returning the output voltage to an optimal level.
In conclusion, the S-8333ACFC-T8T1G is an ideal voltage regulator IC for applications that require precise and efficient voltage control. It works by employing pulse-width modulation, allowing it to accurately and quickly adjust the output voltage in response to changes in load. It is suitable for a variety of electronics and automotive applications, and is designed to work within a wide temperature range.
The specific data is subject to PDF, and the above content is for reference
Switching Controller Polyphase Bidirecti...
IC POWER MANAGEMENTBuck-Boost Regulator ...
IC REG CTRLR BUCK 8-PSOPBuck Regulator P...
IC REG CTRLR BUCK 16TSSOPBuck Regulator ...
IC REG CTRLR BUCK 14TSSOPBuck Regulator ...
IC REG CTRLR BUCK/SEPIC 32QFNBuck Regula...