UC3845D Integrated Circuits (ICs)

Series:	--
Packaging:	Tube
Part Status:	Active
Output Type:	Transistor Driver
Function:	Step-Up, Step-Down, Step-Up/Step-Down
Output Configuration:	Positive, Isolation Capable
Topology:	Buck, Boost, Flyback, Forward Converter
Number of Outputs:	1
Output Phases:	1
Voltage - Supply (Vcc/Vdd):	7.6 V ~ 30 V
Frequency - Switching:	500kHz
Duty Cycle (Max):	48%
Synchronous Rectifier:	No
Clock Sync:	No
Serial Interfaces:	--
Control Features:	Frequency Control
Operating Temperature:	0°C ~ 70°C (TA)
Package / Case:	14-SOIC (0.154", 3.90mm Width)
Supplier Device Package:	14-SOIC
Base Part Number:	UC3845

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

UC3845D Application Field and Working Principle

UC3845D is a DC/DC switching controller chip in the PMIC (Power Management Integrated Circuit) family of ICs. It is a monolithic IC used as a voltage regulator, to provide a regulated output voltage ranging from 5V to 15V, with an input voltage of up to 40V.The UC3845D is a versatile device which can be used in a wide range of applications including, but not limited to: LCD monitors and TV sets, computer systems, machine tools, office automation equipment, electric heating appliances, solenoid or motor control circuits, and electric vehicle power supplies.

Primary Applications

The UC3845D is a fairly common voltage regulator, used for its power supply regulation, so as to ensure a high degree of power supply stability, and reduce noise and spikes. As such, the applications in which it is typically used are ones that require the regulation of unstable or noisy power supplies.This makes it an ideal voltage regulator for applications where accurate control of the output voltage is needed, such as in microprocessor-based systems, where excess voltage and/or voltage spikes can cause corruption of data or random errors due to electrical noise. It is also appropriate for applications in which power dissipation is a critical factor, due to its low power consumption and consistent output voltage regulation.

Operating Principle

The UC3845D works on the principle of pulse width modulation (PWM). This means that the output of the controller is modulated in milliseconds, by varying the duty cycle of the pulse width. This arrangement allows the output voltage to be adjusted in small steps and permits precise voltage regulation, while minimizing harmonic distortion and component stress.The output of the controller is typically a three-phase bridge, which is used to drive the voltage compensator and enhance power supply stability. The voltage compensator is a comparison circuit, which compares the output voltage with a reference voltage and adjusts accordingly, according to the feedback.The output voltage can also be manually adjusted, either by a control line connected to the controller, or with the use of a resistance divider (to provide a varying input to the reference voltage pin).

Advantages of the UC3845D

The UC3845D is a highly efficient regulator and offers several advantages over other types of voltage regulators. Firstly, it is capable of regulating a wide range of output voltages, up to 15V, and can handle an input voltage of up to 40V. Secondly, the PWM control system offers precise voltage regulation, with minimal harmonic distortion, while also helping to reduce the load on components. Thirdly, the low power consumption of the UC3845D makes it an ideal choice for applications in which power dissipation is a critical factor.Finally, the chip features a number of protection features including over-current, thermal overload, and “loss of regulation” protection. This ensures that the circuit remains operational and safe even in the event of a power overload or other fault.

Conclusion

Overall, the UC3845D is a versatile and efficient voltage regulator, capable of providing clean, stable output voltages up to 15V even with a wide range of input voltages. Its PWM control system ensures precise voltage regulation and its low power consumption coupled with its protective features makes it an ideal choice for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description