AP91352MN1-DT8-7 Integrated Circuits (ICs)

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Switch Type:	General Purpose
Number of Outputs:	1
Ratio - Input:Output:	1:1
Output Configuration:	High Side
Output Type:	N-Channel
Interface:	On/Off
Voltage - Load:	3.6 V ~ 12 V
Voltage - Supply (Vcc/Vdd):	Not Required
Current - Output (Max):	2.5A
Rds On (Typ):	50 mOhm
Input Type:	Non-Inverting
Features:	Slew Rate Controlled
Fault Protection:	Current Limiting (Fixed), Over Temperature, Over Voltage, UVLO
Operating Temperature:	-40°C ~ 85°C (TA)
Package / Case:	12-WFQFN Exposed Pad
Supplier Device Package:	W-QFN3020-12

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The AP91352MN1-DT8-7 Power Management Integrated Circuit (PMIC) is a well-developed and integrated switch and load driver designed to improve the energy efficiency and ergonomics of many applications. It is a highly reliable product designed for long-term field applications when power features, safety features, and operational efficiency are required. It offers a wide range of features including voltage switching, current and voltage monitoring, load equalization, load support, integrated bootstrap diode, current limiting, and thermal protection. It is well-suited for use in medium-power applications in a variety of industries including automotive, medical, industrial, and consumer electronics. This product is available in a variety of packages and is suitable for operation across an extended temperature range.The AP91352MN1-DT8-7 PMIC is composed of a combination of MOSFET switches and integrated load drivers. It is designed to optimize energy efficiency by providing a current or voltage control for the entire load distribution system. The load distribution system typically consists of several isolated zones in the system. The AP91352MN1-DT8-7 PMIC allows each zone to be controlled separately by providing a current or voltage control depending on the performance requirements. The MOSFET switches are used to switch the supply bus voltage to the specified zone in response to the load requirement. The load drivers then enable the zone to be accurately regulated by providing a current or voltage control based on the specified performance requirements. The AP91352MN1-DT8-7 reduces total power consumption by adjusting the power requirements of each zone. It allows for an efficient and split-bus system power architecture that distributes the required power to each zone as needed. The integrated bootstrap diode allows the voltage to be dynamically controlled without the use of external components. The current limiting feature ensures safety in high-power applications by limiting excessive current from flowing. The thermal protection feature ensures the AP91352MN1-DT8-7 does not exceed its maximum rated temperature. Overall, the AP91352MN1-DT8-7 is a well-developed and integrated PMIC designed to improve energy efficiency and ergonomics of many applications. It is reliable and designed for long-term field applications requiring power features, safety features, and operational efficiency. It is suitable for operation across an extended temperature range and available in a variety of packages. It provides accurate current or voltage control and is suitable for medium-power applications in a variety of industries including automotive, medical, industrial, and consumer electronics. The AP91352MN1-DT8-7 provides an efficient split-bus system power architecture, and the integrated bootstrap diode and current limiting feature ensure a safe and reliable operation.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description