74AVC4T245GU,115 Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74AVC4T245GU,115 is an advanced 8-bit level translator. It is a device that translates one level of digital signal into another level of digital signal to ensure full interoperability between digital systems that have different voltage levels. This device belongs to the group of logic translators, level shifters and switch circuits which can properly shift data within one specified power supply.

The 74AVC4T245GU,115 is intended to be used when different logic families or biasing points must interface, as a translator across voltage boundaries. It can also be used in any application that requires a voltage level adaptation or level shifting. This device provides a low cost, low current, and low skew solution to a variety of level shifting needs.

The 74AVC4T245GU,115 is a dual-channel, bidirectional bus, with two independent VCC supply rails (VCCL and VCCH) on both sides of the circuit. It features two 8-bit parallel data buses, denoted by A and B, which are configured with two independent VCC supply rails (VCCL and VCCH). The device is designed to switch signal levels between two dissimilar power supplies, each configurable to any voltage from 1.2V to 5.5V.

The 74AVC4T245GU,115 is an active-low device, which means that the A side data travels low when enabled. The B side is configured as an open-collector logic family. Each channel can be independently enabled or disabled by a single logic input.

The 74AVC4T245GU,115 allows data to travel in both directions and changes levels between 1.2V and 5.5V depending on the VCC and VCCL/H supplies of each channel. If one channel is configured with VCCL at 3.3V and the other channel is configured with VCCH at 5.0V, the 74AVC4T245GU,115 can easily switch the data levels from one to the other without any additional components.

Because of its dual supply capability, the 74AVC4T245GU,115 can be used as a translator for converting both TTL and CMOS signals to any other voltage level. For example, it can easily be used for translator between 3.3V and 5V logic, or for converting 3.3V CMOS to 5V TTL signals. In addition, the combination of VCC and VCCL/H can also be used to convert between 1.2V and 5.5V signals.

The 74AVC4T245GU,115 is a reliable and very low noise device, and therefore suitable for a wide range of applications. Due to its low power consumption, low input current, and low voltage characteristics, this device can be used for applications requiring low power and low electrostatic discharge (ESD) levels. It can be used in high speed Ethernet, USB, and differential signaling applications, as well as in numerous other digital systems.

In conclusion, the 74AVC4T245GU,115 is an ideal choice for any application where level shifting or voltage level adaptation is required. It is highly reliable, low cost, and suitable for a wide range of applications, ranging from high speed, to mixed signal networking, to low level interface circuits.

The specific data is subject to PDF, and the above content is for reference