24AA00T-I/MC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

24AA00T-I/MC Application Field and Working Principle

The 24AA00T-I/MC is a series of 2-Wire Serial EEPROM memory devices designed for use in a variety of applications. It is manufactured by the NXP Semiconductors and is considered to be a highly reliable, low-power solution for non-volatile memory applications.

Application Field

The 24AA00T-I/MC memory devices are used to store information after power is disconnected. This is done by storing the data in a non-volatile form. The devices are suitable for digital storage applications in consumer, industrial, and medical products. Moreover, they are also used in automotive and industrial systems, consumer electronics, the Internet of Things (IoT) applications, and communications systems.

The device has a very low power draw, which makes it ideal for use in portable and battery-powered equipment as it does not require much power to retain data in non-volatile memory. This is also beneficial for applications such as field programs. The 24AA00T-I/MC memory devices are highly reliable, resistant to shock, and can withstand extreme temperatures.

Features

The 24AA00T-I/MC memory devices have a 2-wire serial interface and can be used for data storage in eight- or 16-bit modes. These devices store up to 256 or 512K bits of data, respectively. This allows for the storage of wide range of data such as software parameters, device configuration data, or user data.

These memory devices also offer low-power operation and a wide operating voltage range. This allows them to be used in a variety of systems with a wide range of power supplies. Additionally, they also feature protection features such as write protection, a hardware write protect pin, and a range of write protection options, ensuring data stored in it is safe from external sources.

Working Principle

The 24AA00T-I/MC memory device has two control pins, a clock and data line. These two lines are bidirectional, allowing for data transfer in both directions. A logic low on the clock line indicates a data transfer, while a logic high indicates idle mode. The data is transferred in and out of the chip via the data line in serial format.

The chip also contains an internal address counter which is incremented automatically on the successful completion of each data transmission. When the count reaches its maximum value, it is reset to zero.

The 24AA00T-I/MC memory device can be used to write up to 32 bits at a time. Data can be transferred between the device and other devices via the I2C bus. The chip also has an extendable write protect feature, which makes it difficult to erase all the data stored on the chip.

In order to ensure data integrity, the device also features error detection and correction algorithms. These algorithms detect and diagnose any errors during data transfers, preventing data corruption when transferring data.

Conclusion

The 24AA00T-I/MC memory devices are low-power, reliable, and highly resistant to shock and temperature changes. They are suitable for use in industrial, automotive, consumer, and medical applications. With their 2-wire serial interface and extendable write-protect feature, these devices are a safe and reliable choice for storing data.

The specific data is subject to PDF, and the above content is for reference