AT49F001AT-45VI

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AT49F001AT-45VI memory is a type of non-volatile memory (NVM) commonly used in industrial control applications. The AT49F001AT-45VI is a single package 4 Megabit (Mbit) memory device. It offers 4Mbit of storage, with a choice of Serial Peripheral Interface (SPI) or Two-Wire Serial Interface (TWSI) communication interfaces.

The AT49F001AT-45VI is well suited for industrial applications due to its small size and high speed. The unique construction of the device makes it inherently resistant to shock, vibration, and electrical transients. Furthermore, the AT49F001AT-45VI is also available in a wide range of package types, allowing for maximum flexibility in design.

The 4Mbit of non-volatile ferroelectric RAM (FERAM), contained in the AT49F001AT-45VI, utilizes a unique ferroelectric material for the storage of data. This makes the memory highly immune to disruption of power, as well as resistant to radiation. Furthermore, the FERAM technology also allows for extremely low power consumption, making it an excellent choice for battery-powered applications.

The AT49F001AT-45VI also incorporates several data loss protection features. Low-Voltage Detect (LVD) circuitry automatically puts the device into a low-power state in the event of a power failure. Additionally, the memory has Error Correction Code (ECC) capability, which is capable of detecting and correcting up to 2 bit errors in any 256-bit data word. These features ensure the integrity of the stored data, even in the case of a power failure.

In order for the AT49F001AT-45VI to be used in applications, a microcontroller is often used to access the memory over its SPI or TWSI interfaces. The microcontroller is responsible for providing the clock signal, as well as any necessary address and control signals. It also issues read and write commands, which the AT49F001AT-45VI is then responsible for carrying out.

In order to read data from the memory, a read command is issued by the microcontroller. The memory then outputs the data on its output pins. The address of the data is specified by the microcontroller as part of the read command.

In order to write data to the memory, a write command is issued by the microcontroller. The memory then accepts the data on its input pins. As with the read command, the address of the data is specified in the write command.

Overall, the AT49F001AT-45VI is a highly reliable and efficient non-volatile memory solution. Its low power consumption and reliable storage of data make it an excellent choice for industrial control applications. Additionally, its wide range of package types allows for maximum design flexibility.

The specific data is subject to PDF, and the above content is for reference