25AA010A/W16K

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Memory is one of the most commonly used categories of electronics components. In this article, the 25AA010A/W16K application field and working principle will be discussed.The 25AA010A/W16K is a 16K Wafer Scale IC (Integrated Circuit) manufactured by ISSI (Integrated Silicon Solution Inc.). It has a 16 kilobit serial EEPROM memory array and a WSI (Write Status Input) interface. It is typically used in applications such as fobs, key cards, and smart cards. The 25AA010A/W16K is a low-cost, low-power memory with an operating voltage range of 2.5 to 6.5 volts. It has an 8-byte page write capability and a maximum write/erase cycle endurance of 10,000 times. The 25AA010A/W16K is a non-volatile memory and is able to retain its contents even when the power is removed. It also has an internal write protect feature that is used to prevent accidental writes to the memory.The 25AA010A/W16K is composed of two main components: the 16K WSI and the Memory Array. The WSI is the interface between the memory device and the system. It contains an address bus, a data bus, and control signals. The memory array is composed of 16,384 16-bit words, organized into eight 8-byte pages. Each word in the array can be addressed directly, allowing for quick and efficient storage and retrieval of data.The 25AA010A/W16K can be used for a variety of applications, such as remote access systems, cryptographic key storage, ID badges, and patient identification. It can also be used for data logging, such as in medical devices. With the internal write protect feature, the 25AA010A/W16K is well suited for secure data storage applications.The 25AA010A/W16K can be used in either a master or slave configuration. In a master configuration, the device is used as a host, sending commands to the memory array and receiving responses. In a slave configuration, the device is used as a peripheral, receiving commands from the host and sending responses.When using the 25AA010A/W16K in either a master or slave configuration, the device must be initialized using the WSI. This is done by sending out a reset command which clears the memory array and sets the internal write protect feature. Once the device is initialized, it can be used for writing, erasing, and reading data.To write data to the memory array, a write command is sent to the WSI with the address of the word to be written and the data to be written. Data is written 8 bytes at a time, with the data being written to the selected page in the correct byte order. To erase data from the memory array, an erase command is sent to the WSI with the address of the word to be erased. Data is erased 8 bytes at a time, with the data being erased from the selected page in the correct byte order.To read data from the memory array, a read command is sent to the WSI with the address of the word to be read. Data is read 8 bytes at a time, with the data being read from the selected page in the correct byte order.In summary, the 25AA010A/W16K is an excellent choice for secure data storage applications. It is a low-cost, low-power memory with a high write/erase cycle endurance and an internal write protect feature. The 25AA010A/W16K can be used in either a master or slave configuration, allowing it to be used in a variety of applications such as remote access systems, cryptographic key storage, ID badges, and patient identification.

The specific data is subject to PDF, and the above content is for reference