CD4044BDWRE4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic latches are digital ICs that have two stable states. CD4044BDWRE4 is a CMOS logic latch featuring a 4-bit latch and a diagnostic/control interface. It is typically used as a data memory element in digital systems. This device is capable of handling both low and high logic levels without being affected by noise since its output levels remain lo-hi or hi-lo regardless of input conditions.The application field of CD4044BDWRE4 generally includes:

1. Memory element: The standard memory is known as a shift register, which uses multiple latches in series to shift data in. CD4044BDWRE4 is usually used as a single memory element to save data. It can also be used as part of a larger memory system, such as SRAM or ROM.

2. Multi-Level logic systems: This latch is also useful in multi-level logic systems where its output can be used to hold the output of a logic element in a specific state until it’s needed or updated.3. Device Control: CD4044BDWRE4 can be used for various types of device control such as controlling an audio amplifier, broadcasting different messages in a communications system, switching a relays ON/OFF and PWM (pulse-width modulation) control.

The working principle of CD4044BDWRE4 is quite straightforward. Data is only present on the input pins when all of the “Enable”, “Clear” and “Set” pins are on a logic high. This device acts as a data memory, meaning that the data present on the input pins is stored and held until the “Enable” pin is brought low, which then activates the latch and the data is held forever. The “Clear” and “Set” pins are used to define the initial state of the latch when it is enabled. By default, the latch will be clear when no voltage is present on the “Set” pin, or set when voltage is present on the “Set” pin.

When the latch is enabled and the data is stored, the outputs of the latch will be the same as the data stored on the input pins. These outputs are in the form of logic levels, which are “0” or “1”. If the stored data was a logic “1”, then the output of the latch will be a logic “1” and so on. This data is held until the “Enable” pin is brought low, at which point the data is effectively lost and the latch will retain its current state.

CD4044BDWRE4 is a robust, reliable and cost-effective digital latch device and can be used in a variety of applications. It is important to remember that this device should always be enabled and disabled properly as it can be easily damaged if the “Enable” pin is left in an unknown state. As such, this device should be used with care and caution.

The specific data is subject to PDF, and the above content is for reference