MT9042CPR1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MT9042CPR1 is a transceiver and buffer integrated circuit. This device is used for multiplexing/demultiplexing of multiple channels of digital data signals. It’s a cost effective, high-speed solution for an array of applications for the communication industry. The device is used in such applications as data-over-cable systems and multiplexed transmission systems. It can also be used for other telecom and data applications.

The MT9042CPR1 is a transceiver/buffer integrated circuit with features to support the 2.488Gbps serial data or 2.488Mbits/sec rate as per the FC-0 and G.703 telecom standards. The device has a built-in Multiplexer/Demultiplexer (MUX/DMUX) and a 2.488Gbs data path. The high-speed serial data path provided by the MT9042CPR1 allows for multiplexing/demultiplexing of multiple channels of digital data signals. The MT9042CPR1 is used for applications in the telecom industry such as data-over-cable systems and multiplexed transmission systems.

The MT9042CPR1 transceiver integrates multiple input/output transceivers, a MUX/DMUX, parallel/serial port translation, and signal jitter termination functions. The transceiver part is capable of delivering transmit signal up to 2.488Gbps with very low jitter. The buffer part of the device can handle receive signals that range in speeds from 4 Mbps to 2.488Gbps. The device can operate with a wide voltage range of 3.3V and 5V and is designed to be compatible with other telecom and data systems. The MT9042CPR1 is designed to meet the telecom standards such as G.703, G.704, and clock synchronization requirements.

The MT9042CPR1 is a very cost effective device to multiplex/demultiplex digital data signals in telecom data systems. It provides a high-speed link between multiple data sources and storage points. The device supports a wide range of signal inputs including broadband digital signals. The device is optimized for data applications such as cable and DTV systems, as well as telecom and data communications. The MT9042CPR1 can be used as a buffer in telecom applications to absorb signal jitter and ensure data integrity over long distances.

The working principle of the MT9042CPR1 is based on the MUX/DMUX built into the device. The MUX part of the device multiplexes multiple data streams into one stream while the DMUX part of the device demultiplexes the multiplexed stream into several individual streams. The device is designed to handle multiple channels of digital data signals. The signal is first passed through the MUX part of the device which multiplexes the signal into a single signal stream. The signal is then passed through the DMUX which demultiplexes the signal back into multiple data streams. The signal is then passed through the signal jitter termination circuit to ensure data integrity over long distances.

The MT9042CPR1 is a very cost effective and efficient device for multiplexing and demultiplexing digital data over telecom systems. It provides a high-speed link between multiple data sources and storage points and is optimized for data applications such as cable and DTV systems. The device supports a wide range of signal inputs including broadband digital signals and is designed to meet the telecom standards such as G.703, G.704, and clock synchronization requirements. The MT9042CPR1 is a transceiver and buffer integrated circuit that can be used for multiplexing and demultiplexing of multiple channels of digital data signals in the communication industry.

The specific data is subject to PDF, and the above content is for reference