DM74AS760N

Series:	74AS
Packaging:	Tube
Part Status:	Obsolete
Logic Type:	Buffer, Non-Inverting
Number of Elements:	2
Number of Bits per Element:	4
Current - Output High, Low:	--
Voltage - Supply:	4.5 V ~ 5.5 V
Operating Temperature:	--
Mounting Type:	Through Hole
Package / Case:	20-DIP (0.300", 7.62mm)
Supplier Device Package:	20-PDIP
Base Part Number:	74AS760

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DM74AS760N Application Field and Working Principle

DM74AS760N is a type of logic device that can be classified as Logic Buffers, Drivers, Receivers, Transceivers. This device, developed by Texas Instruments, is designed to handle data, address and control signal transmission up to 20 Mbps. It also ensures simultaneous transmission and receiving of digital data signals at an increased rate with regards to noise immunity and signal integrity. This device includes four bidirectional, quasi-bidirectional, and four tri-state buffers.The DM74AS760N will provide interface communication between logic systems and local state machines, processors, and peripherals that require logic signal conditioning with data, address and control lines. This device will be used in applications such as networking systems, telecommunications, and high-speed interconnects. It is also suitable for data-bus control and critical point-to-point linkages as well as microprocessor, minicomputer, memory, and data-acquisition equipment.The DM74AS760N has a working principle that uses electrical signals to direct the transmission of digital information. This device supports two-way communication and utilizes two internal circuit architectures for signal transmission. These architectures can be used to ensure a seamless and successful data transfer.One of the architectures is the bidirectional logic circuit. In this architecture, the logic is generated internally and output on the data outputs, while bidirectional input pins sense the logic inputs and translate them into digital logic outputs. This architecture ensures a fast, noise-free performance and reliability.The second architecture that the device uses is called the quasi-bidirectional. This architecture is similar to the bidirectional but with the added ability to control the output values. The data outputs are generated partially internally and partially from the input pins. This architecture is helpful in situations where the logic inputs may be uncertain but consistent logic values must be sent both ways.The DM74AS760N also uses a tri-state logic circuit architecture. This architecture is similar to the quasi-bidirectional, but it allows the user to manually control the output values by adjusting the voltage levels. This makes it possible to interface with components such as analog-to-digital converters, DACs and ADC converters, among others.Finally, the DM74AS760N also includes four tri-state buffers to ensure reliable transmission and reception of signals. These buffers are used to isolate the logic outputs from each other and to reduce crosstalk between different logic sections.The DM74AS760N logic device offers an ideal solution for those looking for a reliable device to interface between digital and analog components. With its combination of reliable architectures, bidirectional and tri-state logic, and tri-state buffers the DM74AS760N can provide industry-standard quality and consistency. This makes it an ideal choice for projects that deal with data-bus control, general logic buffering and local area network (LAN) applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description