CY74FCT2245CTSOCG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CY74FCT2245CTSOCG4 is a member of the advanced family of logic buffer product lines which is designed to provide reversible bus conversion and expansion. It is designed to conform to the extended temperature requirements of automotive applications. This product is fabricated with a low-power CMOS process, which provides high speed and low power dissipation. It is ideal for applications requiring low quiescent current, and can be used in a variety of automotive systems, such as driver information centers, lighting systems, powertrain, security & convenience and in-vehicle entertainment systems.

The CY74FCT2245CTSOCG4 is an Octal differential transceiver consisting of four non-inverting transceivers conforming to the JEDEC standard, and four inverting transceivers conforming to the JESD-IP-63947 standard. The CY74FCT2245CTSOCG4 is designed to provide full-duplex, differential bus transceiver with bus hold and dataflow control. The chip is designed to provide 1-bit transceiver operation with two separate buses and two power supply rails. It also contains two power supply input pins, two ground pins, and two control pins (CE1/CE2). There is a flow control pin for each side of the transceiver, which is used to flow control data transfer between the two buses. The flow control pins are also used to indicate the idle state of the busses by either driving low (indicating the bus is not active), or driving high in order to indicate that the bus should remain active.

The CY74FCT2245CTSOCG4 is a bus transceiver, which is used to transfer data between two buses. It can be used to transfer data between two different buses, or between two different bits of data on a single bus. It contains two differential transceivers, which are used to transmit data in both directions. The chip also contains two power supply pins, two ground pins, and two control pins (CE1/CE2). The chip can be used to achieve full-duplex, differential bus transceiver data transfer.

The CY74FCT2245CTSOCG4 is designed to convert a single ended signal to a differential signal, or vice versa. It is designed to convert the logic levels of the two input buses to the logic levels of the two output buses. The chip can also be used to expand the bus capacity from one to eight bits of data. The CY74FCT2245CTSOCG4 contains six internal inverting buffers which can be used to invert the logic levels of the two input buses.

The CY74FCT2245CTSOCG4 is a perfect choice for applications which require high speed and low power dissipation. It is ideal for use in automotive systems where it can be used to convert single ended signals to differential signals and expand the bus capacity from one to eight bits. It is also ideal for applications requiring low quiescent current, such as in driver information centers, lighting systems, powertrain, security & convenience and in-vehicle entertainment systems.

The specific data is subject to PDF, and the above content is for reference