Allicdata Part #: | RMSQ2T2POB07-ND |
Manufacturer Part#: |
RMSQ2T2POB07 |
Price: | $ 0.69 |
Product Category: | Uncategorized |
Manufacturer: | Panduit Corp |
Short Description: | RACK ENERGY KIT 7: STANDARD KIT |
More Detail: | N/A |
DataSheet: | RMSQ2T2POB07 Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 0.63000 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
An RMSQ2T2POB07 is a type of power supply converter used to generate and control an alternating current (AC) from a direct current (DC) source. The AC output frequency can be changed by varying the input DC voltage and the output voltage can be adjusted by varying the control parameters. This type of power supply can be used in various applications such as AC motor drives, chargers, inverters, and DC-to-DC converters.
The RMSQ2T2POB07 power supply converter employs a standard full-wave, three-phase motor control scheme, as shown in Figure 1. A split-phase D-Q inductor configuration is used to generate a sinusoidal-like output from a rectified input. The inductor winding structure adds complexity to the control circuitry but eliminates the need for a physical transformer in the system.
The main circuit components of the RMSQ2T2POB07 power supply converter are the rectifier bridge, the power semiconductors, the input filter, the DC bus capacitor, and the output filter. The rectifier bridge converts the input AC voltage into a DC voltage. The power semiconductors are typically MOSFETs, IGBTs, or thyristors and are used to control the current flowing through the inductor. The input filter is used to reduce the amount of noise in the input power, while the DC bus capacitor stores energy and smoothes out the voltage ripple. Finally, the output filter is used to reduce the amount of noise or harmonic content in the output voltage.
To control the voltage and frequency of the output, the RMSQ2T2POB07 uses a digital control algorithm based on a Proportional-Integral-Derivative (PID) control scheme. The PID controller adjusts the switching instant and duty cycle of the power semiconductors to control the output voltage and current. The output voltage is sensed and then compared to the setpoint voltage. The PID controller adjusts the switching instant and duty cycle as needed to keep the output voltage at the setpoint. The output frequency can be adjusted by changing the input voltage, or by changing the control parameters.
In summary, the RMSQ2T2POB07 power supply converter is a compact and efficient way to generate a sinusoidal-like AC output from a DC source. It uses a sophisticated control scheme to control the output voltage and frequency, making it suitable for a wide range of applications such as AC motor drives, chargers, inverters, and DC-to-DC converters. applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
RMSQ2T2POB07 | Panduit Corp | 0.69 $ | 1000 | RACK ENERGY KIT 7: STANDA... |
RMSQ2T2POB02 | Panduit Corp | 1.39 $ | 1000 | RACK ENERGY KIT 2: STANDA... |
RMSQ2T2POB06 | Panduit Corp | 0.69 $ | 1000 | RACK ENERGY KIT 6: STANDA... |
RMSQ2T2POB08 | Panduit Corp | 0.69 $ | 1000 | RACK ENERGY KIT 8: STANDA... |
RMSQ2T2POB03 | Panduit Corp | 1.39 $ | 1000 | RACK ENERGY KIT 3: STANDA... |
RMSQ2T2POB05 | Panduit Corp | 0.69 $ | 1000 | RACK ENERGY KIT 5: STANDA... |
RMSQ2T2POB24 | Panduit Corp | 0.69 $ | 1000 | RACK ENERGY KIT 24: STAND... |
RMSQ2T2POB01 | Panduit Corp | 0.69 $ | 1000 | RACK ENERGY KIT 1: STANDA... |
DIODE GENERAL PURPOSE TO220
CB 6C 6#16 SKT RECP
CA08COME36-3PB-44
CA-BAYONET
CB 6C 6#16S SKT PLUG
CAC 3C 3#16S SKT RECP LINE