43F180E

Series:	Ohmicone® 40
Packaging:	Bulk
Part Status:	Active
Resistance:	180 Ohms
Tolerance:	±1%
Power (Watts):	3W
Composition:	Wirewound
Features:	--
Temperature Coefficient:	±20ppm/°C
Operating Temperature:	--
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.220" Dia x 0.594" L (5.60mm x 15.10mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Through Hole Resistors

A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. Resistors act to reduce current flow, and, like all electrical components, they have a variety of applications within electronic circuits. Many types of resistor are available, and resistance value, power rating, and physic characteristics determine which type to use in a given application.Amongst the various types of resistors available, there is the “through hole” resistor, otherwise known as the through-hole resistor, or the through-the-board resistor. This type of resistor is mounted onto a circuit board by passing its leads through holes in the board and securing it in place with solder. Due to the construction, it has a higher maximum power rating than SMT or other types, which makes it ideal for use in critical circuit components, such as amplifiers.

What is a 43F180E Through Hole Resistor?

The 43F180E is a type of through hole resistor offered by several different manufacturers. It is offered in several different sizes, from 0.25 watt to 80 watt. It utilizes a ceramic body material, with gold-plated copper pins embedded into the ceramic body, and epoxy resin used to seal its interior. It is able to operate at voltages up to 375 volts, which it can withstand without damage.

Applications of 43F180E Through Hole Resistors

The 43F180E is suited for use in a wide variety of electronic applications. It has been used in a variety of industries, including automotive, communications, consumer electronics, medical, and more. Common applications for these resistors include voltage regulation, current limiting, wave-shaping, signal isolation, and general voltage drop.

Working Principle of 43F180E Through Hole Resistors

The working principle of the 43F180E is quite simple. When an electrical current passes through the resistor, the electrical current is resisted by a certain amount, which is determined by the resistor’s value. As a result, the current is reduced. This reduction in current can be used to regulate the flow of current or for other purposes.

Conclusion

The through hole resistor is a type of passive two-terminal electrical component that implements electric resistance in a circuit, and is able to operate in varying conditions. The 43F180E through hole resistor is one such through-hole resistor, and it is suited for use in many common electronic applications. It operates on a simple resistance principle, where a voltage drop occurs as a result of current passing through the resistor.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description