Allicdata Part #: | 402KXTR-ND |
Manufacturer Part#: |
MFR-25FRF52-402K |
Price: | $ 0.01 |
Product Category: | Resistors |
Manufacturer: | Yageo |
Short Description: | RES 402K OHM 1/4W 1% AXIAL |
More Detail: | 402 kOhms ±1% 0.25W, 1/4W Through Hole Resistor Ax... |
DataSheet: | MFR-25FRF52-402K Datasheet/PDF |
Quantity: | 1000 |
5000 +: | $ 0.00467 |
10000 +: | $ 0.00419 |
25000 +: | $ 0.00384 |
50000 +: | $ 0.00361 |
125000 +: | $ 0.00353 |
Series: | MFR |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Resistance: | 402 kOhms |
Tolerance: | ±1% |
Power (Watts): | 0.25W, 1/4W |
Composition: | Metal Film |
Features: | -- |
Temperature Coefficient: | ±100ppm/°C |
Operating Temperature: | -55°C ~ 155°C |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.094" Dia x 0.248" L (2.40mm x 6.30mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors, such as the MFR-25FRF52-402K, are resistive components which control, limit or provide current in a circuit. These resistors are composed of a cylindrical helix of a non-conductive material, which is wound around a cylindrical core and soldered to a terminal. In some cases, the same non-conductive material may be used for both the central core and the helix.
The MFR-25FRF52-402K is a through hole resistor built to the MIL-STD-202 standards, and is designed to dissipate a maximum of 0.2 watts of power. Its resistance value is measured at 402K ohms (+/- 5%), which is suitable for use in low to medium voltage applications. It is constructed from copper-clad laminates, which give it superior strength and durability. It is also designed to have a very low insertion loss, meaning that less current is lost as it passes through the resistor itself.
The MFR-25FRF52-402K is most commonly used in applications such as circuit protection, signal conditioning, and voltage reduction. It is particularly useful for circuits where a high resistance value is needed, such as filtering circuits or sensor feedback control. It can also be used as a shunt for current protection, to limit the amount of current passing through a given circuit.
The MFR-25FRF52-402K is designed to use a two-terminal structure, with one of the terminals connected to the resistor itself and the other connected to the surrounding circuit. This two-terminal structure ensures that the resistor can dissipate heat effectively while still having an efficient electrical connection to the surrounding circuit. When the current passing through the resistor increases, the resistance within the resistor begins to increase, allowing less current to flow through the circuit.
When the current passes through the resistor, the heat released is absorbed by the surrounding components, preventing excessive heat buildup in the resistor itself. This not only prevents the resistor from becoming too hot, but also prevents damage to any other components in the surrounding circuit. The heat also dissipates quickly, ensuring that the resistor does not remain too hot or overheat.
The MFR-25FRF52-402K is designed to be a reliable and cost-effective resistor for use in a wide variety of electrical applications. Its two-terminal structure makes it easy to connect to other components in the circuit, and its low insertion loss ensures that it does not cause significant losses in overall current. Its MIL-STD-202 standards and copper-clad laminates also make it a highly durable component, capable of withstanding a wide range of environmental conditions.
The specific data is subject to PDF, and the above content is for reference
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...