CF14JT12M0

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

What is CF14JT12M0? CF14JT12M0 is a Through Hole Resistor, a type of passive electrical component that resists the flow of electric current. In particular, CF14JT12M0 is a Radial Lead Axial Leads through hole resistor with an operating temperature range of -55C to +155C. It is a standard two-terminal device with two leads, usually a red one and a black one, that protrude from its cylindrical body.

The application field and working principle of the CF14JT12M0 is as follows. Its most common use is to regulate the current flow in a circuit, preventing damage due to overvoltage or overcurrent. As the current flows through the resistor, a voltage drop is created, which is proportional to the resistor’s resistance. The resistor’s resistance can be adjusted by changing its length, size, or material (such as metal or alloy) combination.

When deployed in a power supply, the CF14JT12M0 operates as a current-limiting device. Upon sensing an overvoltage or overcurrent, the resistor absorbs the excess current, typically until the device reaches its maximum recommended wattage rating, and prevents the circuit from being damaged. This not only makes the resistor a reliable safety device, but also a cost-effective one since it can easily be replaced if it is damaged.

CF14JT12M0 through hole resistors are typically used in applications such as Power Supply, Switch Mode Power Supplies (SMPS), Automotive Electronics, Computer Electronics, Security Systems, Telecommunication Networks, and Other Industrial Electronics. Commonly used in circuits that require adjustable current flow, including analog-digital converters and voltage regulators, these devices offer superior stability over wide temperature ranges. Thanks to their sheer durability and low cost, some resistors are also used to control motors, generate tones, and serve as noise suppressors.

To ensure optimal performance and lifespan, it is important to install and setup the resistors correctly. Upon installing resistors into a circuit, proper lead spacing and mounting should be followed for improved heat dissipation and to avoid mechanical shorting of other components. Additionally, proper derating according to temperature must be applied to reduce the risk of failure due to overheating.

Given their many advantages, Through Hole Resistors such as CF14JT12M0 are highly valuable components in the electrical engineering industry and will continue to serve as the backbone of many electrical systems and devices in the near future.

The specific data is subject to PDF, and the above content is for reference