MCP4252-103E/MF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MCP4252-103E/MF is a digital potentiometer IC connecting microcontrollers to the I2C bus. In data acquisition applications, MCP4252-103E/MF allows users to adjust the resistance of a fixed device on the fly when the parameters of a system require to be adjusted on the fly. It can also be used to sample remote potentiometers and gain a readout of the electrical resistance. In other applications, it can be used as a precision electronic volume control mechanism for audio applications.

Working Principle

The MCP4252-103E/MF works on a dual-mode I2C bus digital potentiometer protocol. This helps in communication between the device and the microcontroller. The I2C protocol is used to set the wiper resistance to the desired level. The wiper resistance is set to a value by the two 10-bit registers contained in the device. Writing to the registers with different values establishes the calibration resistance of the device. This can be used to modify the current running through the device, which is then reflected in the changes in the output resistance.

The MCP4252-103E/MF works by integrating a resistor array into the device. This resistor array is then connected to the wiper, which is controlled by the I2C protocol. The wiper is used to adjust the resistance of the entire device and thus it can be used to adjust the current passing through the device. The wiper is also equipped with pull-up resistors to guarantee that when the device is not in use, the output will remain in a high impedance mode. This helps in avoiding any possibility of shorts in the device.

The wiper resistance of the device is adjusted using the two integrated 10-bit phase/detect registers. The phase/detect registers are programmed with different values which in turn control the resistance of the device. The two registers are configured to establish a minimum and maximum resistance of the device. The minimum resistance is configured using the lower 10-bit register and the maximum resistance is configured using the upper 10-bit register. Thus any change in the wiper resistance between the configured minimum and maximum can be made with the help of the I2C commands.

Furthermore, the MCP4252-103E/MF also features an on-chip circuit protection system. This feature allows the device to protect itself from over-current conditions and short circuit conditions. This helps in protecting the device from any accidental damage. Additionally, the device also has an ESD protection mechanism which protects the device from electrostatic discharge.

Overall, the MCP4252-103E/MF data acquisition device is designed for versatile applications, ranging from providing volume control for audio control applications to precision calibration for other digital potentiometers. It enables the user to program the wiper resistance between minimum and maximum levels, with options of pull-up resistors and on-chip circuit protection to ensure the device is stable, reliable and safe. Most importantly, the dual-mode I2C bus protocol makes controlling the device convenient and efficient.

The specific data is subject to PDF, and the above content is for reference