ADS5481IRGCT Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Analog to Digital Converters (ADC) are devices that translate analog electric signals into digital output signals. The ADS5481IRGCT is a 12-bit Analog Digital Converter (ADC) that was developed by Texas Instruments Incorporated and is widely used in the data acquisition field. This device provides high performance features such as a wide power supply range, high speed data rate, low power consumption, and a low noise floor. This ADC is suitable for use in applications where a large number of digital signals need to be obtained from an analog input signal.

The ADS5481IRGCT is a 12-bit, 500 MSPS ADC. It is capable of sampling input signals from DC to its maximum sampling rate of 500 megasamples per second (MSPS). It has a high SNR of 83 dBFS and a dynamic range of 64 \u00B10 dBFS. It has an input range of 0.2VRMS to 2.2VRMS and an Isolation Extended range of 2.2VRMS to 4.4VRMS. The ADC integrates a high performance, on-chip, JESD204B-capable interface, which allows it to transmit data with a serial-data link protocol.

The ADS5481IRGCT is designed to operate from a 6V power source, allowing for a wide range of power supply levels. It has a low power consumption of 1.3W at its maximum sampling rate, and only 0.045 W in power down mode. For low noise operation, the device features a maximum noise figure of -77 dBFS and a signal-to-noise-and-distortion ratio (SINAD) of 72 dBFS.

The ADS5481IRGCT is designed for use in applications such as test and measurement instrumentation, laboratory automation, medical imaging, portable ultrasound, and consumer audio systems. Additionally, it is suitable in many automotive applications such as ultrasound accelerometers, audio signal sensing, and pressure/temperature transducers.

The ADC works by using an analog-to-digital converter (ADC) that takes the input voltage and converts it into a digital number. The conversion rate of the ADS5481IRGCT is determined by the clock frequency of the incoming analog signal. The ADC has an on-chip sample and hold circuit, which captures the incoming voltage, and then converts it into a digital signal by using an internal comparator. The output of this process is a 12-bit data word.

The ADS5481IRGCT has a high-speed, low-power architecture, which makes it an ideal choice for data acquisition applications. It is designed for simplicity and ease of use, and has advanced features such as integrated EEPROM, on-chip temperature sensor, low power control and SPI interface. The ADC also has an integrated programmable gain amplifier (PGA), which enables users to achieve the best SNR performance with minimal noise contribution.

The ADS5481IRGCT is an excellent choice for many data acquisition applications. It provides excellent performance features, low power consumption, and a wide power supply range. The on-chip sample and hold circuit, integrated JESD204B serial interface, and programmable gain amplifier (PGA) all combine to make this ADC a powerful, reliable, and efficient tool for data acquisition.

The specific data is subject to PDF, and the above content is for reference