RNC60J28R7FSB14

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

One of the commonly used components in through hole resistors is the RNC60J28R7FSB14. It is one of the smallest resistors offered with a length of only 2.4mm and a width of 2.3mm. It has a single-turn design with a 0.6mm nominal form factor. The resistor is connected by soldering, and it is composed of two metal elements, a resistor element and a substrate element, which are connected to each other with solder. Its nominal resistance value is 28R7 with a tolerance of 1%.

As for the application of the RNC60J28R7FSB14, it is used mainly in high frequency circuits, it is used as a matching element, so as to achieve the best design for the circuit and its components. It is also used in power supply circuits to enhance the power hold of the circuit, by adding load resistance value. The RNC60J28R7FSB14 is also used to reduce the signal noise, which is common in digital circuits. It is also used in wide range of power supply and medical application circuits.

The working principle of RNC60J28R7FSB14 involves the concept of resistance. The resistor’s job is to oppose the current flow, which is done by providing a certain amount of resistance to the electrical current. This opposition of currents helps to regulate the flow of electrons in electrical circuits, and this resistance works according to Ohm’s Law. The resistance value is dependent on the material and size of the resistor, which in this case is 28R7 with a tolerance of 1%. The resistance can be adjusted by changing either the material or the size of the resistor.

The RNC60J28R7FSB14 can be used in any circuit that requires a fixed resistance. Its small size makes it suitable for use in a wide range of electronics, from power supplies to consumer electronics, which require precise resistance values. It is a low-cost, adjustable resistor, making it an ideal choice for designers of through hole resistors.

In conclusion, the RNC60J28R7FSB14 is a through hole resistor which is composed of two metal elements, a resistor element and a substrate element connected by solder. It is mainly used in high frequency circuits as a matching element, power supply circuits to enhance power hold, and signal noise reduction profiles in digital circuits as well as wide range of power supply and medical application circuits. The RNC60J28R7FSB14 works by providing a certain amount of opposition to the electrical current, according to Ohm\'s Law. It can be easily adjusted by changing either the material or the size of the resistor, making it an ideal choice for designers of through hole resistors.

The specific data is subject to PDF, and the above content is for reference