RC14KB6K80

Series:	RC
Packaging:	Bulk
Part Status:	Active
Resistance:	6.8 kOhms
Tolerance:	±10%
Power (Watts):	0.25W, 1/4W
Composition:	Carbon Composition
Features:	Non-Inductive, Pulse Withstanding
Temperature Coefficient:	--
Operating Temperature:	-55°C ~ 125°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.094" Dia x 0.248" L (2.40mm x 6.30mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors: RC14KB6K80 Application Field and Working Principle

Through hole resistors are an essential component in electronic circuits, with a variety of application fields, ranging from amplifier circuits to motor controllers. In this article we will examine the RC14KB6K80 application field and working principle, to gain a better understanding of the function of such a resistor.The RC14KB6K80 is a type of through hole resistor, also known as a discrete resistor due to its individual construction. It is a carbon-based resistor, constructed with copper connecting leads and a ceramic coating, measuring 6.6mm in length with a 1.6mm outside diameter. It is a three-terminal resistor, providing a high resistance of 14K OHM, capped with a 25K OHM ceramic body.Due to its high resistance and low current rating, the RC14KB6K80 is ideally suited to use as a voltage divider, allowing for the accurate measurement of voltage in an electronic circuit. This is achieved through the separation of the resistor into two sections, as shown in Figure 1.Figure 1: Voltage Divider schematicThe current flow created by a voltage divider is determined by the resistance values of the two resistors, higher resistance values in each section will result in a decreased current, while lower resistance values will result in an increased current.Another common application of the RC14KB6K80 is as a reference voltage resistor, allowing an appropriate voltage level to be maintained in an inverter circuit. This is achieved by connecting the RC14KB6K80 in series with another type of resistors in such a way that any variations in the current flow, caused by variations in the voltage, is minimized.The working principle behind the RC14KB6K80 can be summed up in one sentence: The value of the total resistance is equal to the sum of the two resistances in series. This can be demonstrated by Ohm’s Law, which states that the current flow through a resistor is proportional to the potential difference across its ends.In essence, by connecting two resistors in series, the total resistance is equal to the sum of the two resistors, with current flow divided equally based on their resistance values. The exact distribution of current can be calculated using the voltage divider equation.The RC14KB6K80 is an ideal choice for any application that requires a high resistance and low current rating. Its ceramic body and three-terminal design makes it suitable for use in a variety of electronics applications, such as voltage dividers, reference voltage resistors and motor controller circuits. Its resistance value, as well as its working principle, make the RC14KB6K80 a vital component of any electronics circuit.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description