MFP50SBRD52-365R

Series:	MFP
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	365 Ohms
Tolerance:	±0.1%
Power (Watts):	0.5W, 1/2W
Composition:	Metal Film
Features:	--
Temperature Coefficient:	±25ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.094" Dia x 0.248" L (2.40mm x 6.30mm)
Height - Seated (Max):	--
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors: MFP50SBRD52-365R application field and working principle

Through-hole resistors are one of the most common components in electronic circuits. They are used to reduce or limit the flow of electrical current in a circuit, and come in a variety of shapes and sizes to accommodate different electrical needs. MFP50SBRD52-365R is one such resistor and can be used for a wide range of applications.MFP50SBRD52-365R is a radial leaded, axially polarized resistors with a power rating of 5 Watts and a resistance range of 0.1 to 10KΩOhms. It is encapsulated in a thermoplastic housing filled with a flame-retardant silicone material. The resistor is rated to operate between -55℃ to +155℃. It is also polarity sensitive, meaning that it is necessary to properly orient the resistor when mounting it in a circuit. This component has a reverse voltage of 400V and peak load surge current of 4A.The major application field of MFP50SBRD52-365R is in the automotive industry. Motors, generators, fuel pumps, lighting, radios, ignition systems, and exhaust systems all use it for voltage and current limiting. In addition, it can be used for heater applications in industrial machinery and consumer applications, such as heaters and ovens.The working principle of the MFP50SBRD52-365R is based on Ohm’s law. This states that electrical current through a conductive material is directly proportional to the voltage applied across it. When an electrical current passes through a resistor, this creates a particular amount of resistance, thus reducing the current flowing through the circuit.The MFP50SBRD52-365R can be used in both AC and DC circuits. In DC circuits, the resistor’s resistance decreases as its resistance rating increases. In AC circuits, its resistance is more complicated; it increases as frequency increases but decreases as voltage increases.The MFP50SBRD52-365R also has a wide range of noise characteristics. Its thermal noise and flicker noise can be minimized by using zero ohms resistors (ZR-type components) in the circuit. The resistor also has a dielectric absorption and discharge characteristic, meaning it absorbs energy until the capacitor discharges, limiting the voltage on the circuit.Overall, the MFP50SBRD52-365R through-hole resistor is a reliable and versatile component that is often used in automotive applications, industrial machinery, and consumer appliances. It works according to Ohm’s law and can be used with AC and DC circuits. Its noise characteristics can be minimized with the use of zero ohms resistors and its dielectric absorption and discharge rate can limit the voltage on the circuit.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description