KNP300JB-52-0R75

Series:	KNP
Packaging:	Bulk
Part Status:	Active
Resistance:	750 mOhms
Tolerance:	±5%
Power (Watts):	3W
Composition:	Wirewound
Features:	Flame Retardant Coating, Safety
Temperature Coefficient:	±300ppm/°C
Operating Temperature:	-40°C ~ 200°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.256" Dia x 0.689" L (6.50mm x 17.50mm)
Height - Seated (Max):	--
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors are resistors with two electrical terminals that protrude from the top of the outer casing. The resistors are then placed into the appropriate circuit board, and the electrical connections from the terminals go through the board and make contact with other components. They are designed for higher current ratings than surface mount resistors. The three most common types of through hole resistors are axial, radial, and wirewound resistors. The KNP300JB-52-0R75 is a through hole resistor with a power rating of 300 mW at a resistance value of 52 ohms. It is an axial-leaded resistor, which means that the two leads are attached to opposite ends of a cylinder. The outer casing of the resistor is made of epoxy and is 0.75 inches long.The KNP300JB-52-0R75 is often used in devices such as amplifiers and electric motors. These devices are often required to regulate the current and voltage in the associated circuit. The resistor helps to reduce the signal that enters the device, thus preventing it from overloading.The working principle of the KNP300JB-52-0R75 is quite simple. When electric current passes through the device, a voltage drop will occur over its length, known as Ohm\'s Law. This voltage drop is determined by the resistor\'s ohmic value (resistance) and the current passing through the device. As the resistance of the resistor remains the same, the greater the current, the greater the voltage drop will be. Thus, the greater the current, the lower the voltage entering the device, resulting in better device performance.Overall, the KNP300JB-52-0R75 is one of the more popular through hole resistors due to its high power rating and reliable performance. Its wide application in devices such as amplifiers and electric motors, make it an excellent choice for electronic manufacturers. Its working principle is based on the fundamental application of Ohm\'s Law, which is a fundamental concept in electrical engineering.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description