KNP700JB-91-20R

Series:	KNP
Packaging:	Bulk
Part Status:	Active
Resistance:	20 Ohms
Tolerance:	±5%
Power (Watts):	7W
Composition:	Wirewound
Features:	Flame Retardant Coating, Safety
Temperature Coefficient:	±300ppm/°C
Operating Temperature:	-40°C ~ 200°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.335" Dia x 0.965" L (8.50mm x 24.50mm)
Height - Seated (Max):	--
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through Hole Resistors are electrical components which dissipate energy in the form of heat when activated. This type of resistors is normally applied to an array of low voltage electrical circuits such as computers, robotics, and other electronic devices. Through Hole Resistors are often classified by their resistance, tolerance, temperature rating, and other factors.One such example of a Through Hole Resistor is the KNP700JB-91-20R. This resistor has many different characteristics that make it suitable for a variety of applications. This electrical component is rated for a maximum power of 25 watts, a resistance of 200 ohms, and a tolerance of 0.1%. It also has a large temperature range of from -55 to +250 degrees Celsius, and is able to withstand 3.5 Watts/K temperature rise.The KNP700JB-91-20R is mainly used for low noise applications such as audio, telephone, and loudspeaker systems. This electrical component works by creating a small electrical current when applied with a voltage. This current is then diverted away from the connecting components, reducing the amount of electrical interference and allowing for better signal clarity. To ensure maximum efficiency and performance, the KNP700JB-91-20R must be securely installed and properly connected.When considering the application and working principle of the KNP700JB-91-20R, it is important to note that there are several standard specifications. The first is the rated values of 0.1%, 10KΩ, and 25 watts. These values indicate the resistor’s maximum load capability and tolerance level. It is also important to consider the minimum and maximum temperature ratings, which is -55 to +250 degrees Celsius for this model.Another important consideration is the ESR (Equivalent Series Resistance) and DCR (Direct Current Resistance). The ESR is the electrical resistance of the resistor under steady AC current conditions, and is typically listed with the impedance and frequency in the data sheet. The DCR is the electrical resistance of the resistor under direct current conditions, and is typically listed with the frequency and the DCR value.In addition, it is important to consider the mechanical stability of the component, as the KNP700JB-91-20R is housed in a metal can. This component is designed to be mechanically robust in order to ensure reliable performance and electrical integrity. When considering the installation of the KNP700JB-91-20R, it is important to consider the environment in which it will be placed. For example, if it is being installed in an environment with a high level of humidity, then a special enclosure may be necessary in order to protect the component from moisture. When operating the KNP700JB-91-20R, it is important to adhere to the maximum voltage rating. This component is rated for a maximum voltage of 20 volts. If the voltage applied is greater than this, then the resistor may become damaged and lead to operational failure. It is also important to note that the resistor should never be exposed to temperatures that exceed the maximum rated temperature, as this can also lead to permanent damage.In conclusion, the KNP700JB-91-20R is a type of Through Hole Resistor with a wide range of applications. It is rated for a maximum power of 25 watts, a resistance of 200 ohms, and a tolerance of 0.1%. It also has a large temperature range of from -55 to +250 degrees Celsius, and is able to withstand 3.5 Watts/K temperature rise. The KNP700JB-91-20R is mainly used for low noise applications such as audio, telephone, and loudspeaker systems. When considering the installation and working principle of the KNP700JB-91-20R, it is important to consider the rated values, ESR and DCR, maximum voltage rating, and mechanical stability.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description