WW1JT13R0

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are resistors with leads that are passed through holes in a circuit board, thus providing an electrical connection between two points on a printed circuit board. They are generally used when a larger, heavier resistor is needed or when a strong electrical connection must be established across the printed circuit board. The WW1JT13R0 is a through hole resistor that is commonly used in a variety of applications.

The WW1JT13R0 is a 1 watt, 5%, 200 ohm, through-hole resistor. It is made with a metal alloy wire that is coated in a ceramic and then fused to metal end caps, which are then soldered to the circuit board. This construction provides excellent thermal dissipation within the device, as well as excellent electrical contact between the two end caps when placed on the circuit board. Its resistance tolerance is 5%, making it a great choice for applications that require precise levels of resistance.

This resistor is well suited for use in both low voltage and high voltage applications. At low voltages, the WW1JT13R0 is used to provide current limiting, bridge rectification, and voltage regulation. At high voltages, it is also used to protect sensitive components (like transistors) from voltage spikes.

When using the WW1JT13R0 in a high voltage application, it is important to have an understanding of its working principle. The device works by providing a physical barrier between two points on a printed circuit board. This barrier serves two purposes: it limits the amount of current that can flow between the two points, and it provides protection for the components connected to the two points.

When electricity is applied, the resistor conducts the current from one point to the other, providing a constant resistance to the flow of current. This resistance is expressed in ohms. The voltage drop across the resistor is determined by the ratio of the resistance and the current flowing through the resistor. This is known as Ohm\'s law. The WW1JT13R0 features a 5% resistance tolerance, which means that it can be relied upon to provide precise amounts of resistance for a wide range of applications.

The WW1JT13R0 is often used for signal conditioning applications. It provides high frequency filtering of signals, allowing only signals with frequencies within a certain range to pass through the resistor. This allows signals to be filtered out that can interfere with the reliable performance of the circuit. The WW1JT13R0 can also be used in audio-frequency applications, where it provides a low-pass filtering effect, allowing frequencies below a certain point to pass through.

The WW1JT13R0 through hole resistor is an ideal choice for a variety of applications. With its excellent thermal dissipation, precise resistance tolerance, and rugged construction, it is capable of withstanding harsh environmental conditions. With its wide range of uses, the WW1JT13R0 is an invaluable tool for anyone looking to build a reliable, safe, and efficient circuit.

The specific data is subject to PDF, and the above content is for reference