KNP700JB-91-0R62

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are an essential component for electronic circuits. They come in a variety of shapes, sizes, and ratings, allowing devices to be used in a wide range of applications. One such device is the KNP700JB-91-0R62, which is a Through Hole Resistor with a nominal resistance of 0.62 Ohms, a rated DC current of 500 mA, and a rated wattage of 1/4 Watt. This Through Hole Resistor is a popular choice for applications requiring a 1/4 Watt Resistor, due to its small size and low resistance value.

The KNP700JB-91-0R62 is a fairly general purpose resistor that can be used in a variety of applications. It is particularly useful for low power applications, as its low resistance value allows more current to flow with less dissipative heating. This makes it ideal for circuits such as audio amplifiers, small DC motors, and LED indicators. It can also be used in high power applications, such as in solar cells, as its low resistance helps to limit the current flowing in the circuit.

The main component of a Through Hole Resistor is a resistive element, which typically consists of an oxide film that is mounted on a ceramic core. This resistive element is connected to two or more electrodes, which are then mounted onto the resistor body. The KNP700JB-91-0R62 is a single-layer Through Hole Resistor, meaning it has a single resistor element mounted onto the ceramic body. This provides it with a number of advantages, such as lower power dissipation, higher heat dissipation, and greater reliability.

The working principle of the KNP700JB-91-0R62 is based on the basic electrical resistance law. This law states that the current through a conductor is directly proportional to the voltage applied to the conductor. In other words, the resistance of the Resistor will determine the amount of current that can flow through it when a certain voltage is applied. This means that the resistance of the KNP700JB-91-0R62 will determine the amount of current that can flow through it when a voltage is applied across it.

The ability of the KNP700JB-91-0R62 to control current flow is particularly useful in applications where a specific voltage or current is required. By changing the resistance of the resistor, it is possible to limit the amount of current flowing through the circuit, allowing for more precise control of the electrical signals. Additionally, the KNP700JB-91-0R62 can be used as a voltage divider, which allows for the voltage level of a signal to be adjusted.

Overall, the KNP700JB-91-0R62 is a reliable and versatile Through Hole Resistor that has a wide range of applications. Its small size, low resistance value, and low power dissipation make it an ideal choice for audio amplifiers, small DC motors, LED indicators, and for use as a voltage divider. As such, it is a popular choice for a variety of applications.

The specific data is subject to PDF, and the above content is for reference