SC16C650AIB48,128

Series:	--
Packaging:	Tape & Reel (TR)
Lead Free Status / RoHS Status:	--
Part Status:	Obsolete
Moisture Sensitivity Level (MSL):	--
Features:	--
Number of Channels:	1, UART
FIFO's:	32 Byte
Protocol:	--
Data Rate (Max):	3Mbps
Voltage - Supply:	2.5V, 3.3V, 5V
With Auto Flow Control:	Yes
With IrDA Encoder/Decoder:	Yes
With False Start Bit Detection:	Yes
With Modem Control:	Yes
Mounting Type:	Surface Mount
Package / Case:	48-LQFP
Supplier Device Package:	48-LQFP (7x7)
Base Part Number:	SC16C650

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SC16C650AIB48,128 Interface- UARTs (Universal Asynchronous Receiver Transmitter)

The SC16C650AIB48,128 is an integrated circuit designed for the interface (UART) applications. It is a Universal Asynchronous Receiver Transmitter (UART) which is a semiconductor device for data transmission between two devices. The IC is pin-compatible with other 6 serial UARTs and also has additional features like a wait-timer and a baud rate generator. The SC16C650AIB48,128 is an integrated device which is suitable for applications that require fast data rate, low cost and fast setup.The SC16C650AIB48,128 is designed to be used in communications systems such as modems, laptops, embedded systems, POS terminals, industrial control systems, and more. It is a cost-effective design and is easy to use. The integrated circuit contains all the circuitry that is necessary for the UART interface, and this includes a receiver and transmitter, FIFO (First In First Out) buffers and a UART controller, which is responsible for providing the serial data transfer.The transmitter and receiver in the SC16C650AIB48,128 are connected to a bidirectional data bus that is compatible with all the standard UARTs. A 9-bit logic encoding is used for communication between the receiver and transmitter. The 9-bit encoding includes a parity bit, a start bit, and 8 bits of data. The receiver and transmitter are also able to receive and transmit data in both RS-232 (RS-423) and the universally compatible RS-485 (V.23) formats.The SC16C650AIB48,128 also features an asynchronous FIFO (first in, first out) buffer. This FIFO has 16 levels of addressable bytes, with each byte containing 8 data bits. The UART sends data to the FIFO that is stored until the receiver is ready to receive it. This FIFO allows for high speed data transfers and is used when the speed of the system exceeds the rate of the transmitter or receiver.The SC16C650AIB48,128 also includes an On-Chip Baud Rate Generator (BRG). The BRG is responsible for generating a clock signal required by the receiver and transmitter. The BRG is configurable and can be programmed to generate any clock rate from 1200 baud to infinity baud.The SC16C650AIB48,128 also includes a wait timer that prevents data from entering the FIFO until it is ready to receive it. This timer can be programmed to wait for up to 8 clock cycles before time-out. The timer is also used in systems where the speed of the receiver or transmitter exceeds the rate of the data byte.The SC16C650AIB48,128 also has two independent interface pins which can be used to control the even and odd bits of the data byte. The transfer of data between the receiver and transmitter is done on a bit-by-bit basis, allowing for the transmission of any 8 bits of data in an asynchronous manner.The SC16C650AIB48,128 interface is a simple and low-cost solution for the universal asynchronous communication interface. It is suitable for use in a variety of applications. The interface is easy to program and is pin-compatible with all the standard UARTs. It is also capable of providing a variety of data rates and is capable of being used in systems that require high speed data transfers.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description