43F100

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 43F100 is a Through Hole Resistor. Through Hole Resistors, also referred to as Through Hole Resistor, are the most basic form of electrical components found in almost all electrical and electronic circuits.

The 43F100 is an axial resistor with a tolerance of ±5%. It features a nickel-plated, iron-based resistive element mounted in a heat-resistant epoxy-coated, glass-clad, tubular-shaped body. It is manufactured under Robotech’s all-weather seal and is rated at 100 watts/kV.

The 43F100 has a wide range of applications due to its high power rating. It is suitable for a variety of purposes such as circuit protection, power control, voltage regulation, current limiting, etc. Its robust design makes it suitable for general purpose and environmental testing applications.

The working principle of the 43F100 is based on the concept of Ohm’s law. According to Ohm’s law, electrical resistance is determined by the ratio of applied voltage to current measured across a resistor. The 43F100 uses this principle to create a controlled resistance that helps protect circuits from excessive current, voltage, and heat.

The 43F100 is constructed of a metal alloy that consists of nickel, copper, and iron. This metal alloy has a higher resistance than a pure metal, and is used to control the precision of the resistance value. The thickness of the metal can also be adjusted in order to achieve the desired resistance value. The resistor is then mounted into a glass-clad, tubular body with an epoxy-coated insulator that prevents damage from heat and condensation.

The 43F100 is designed to offer high power stability, making it suitable for applications that require a high degree of reliability. It also offers accurate current control and uniform performance over a wide temperature range, making it suitable for use in both general-purpose and specialized applications. The 43F100 is also available in a variety of sizes, with values ranging from 0.1 ohms to 10 ohms.

In summary, the 43F100 is a high-power, through-hole resistor suitable for a wide range of applications due to its reliability and precision. It is constructed of a carefully balanced metal alloy and features a precision epoxy-coated insulator that provides protection against heat and condensation. The 43F100 is available in a variety of sizes, with values ranging from 0.1 ohms to 10 ohms. It is suitable for use in a variety of applications, such as circuit protection, power control, voltage regulation, and current limiting.

The specific data is subject to PDF, and the above content is for reference