Allicdata Part #: | 43F12RE-ND |
Manufacturer Part#: |
43F12RE |
Price: | $ 0.46 |
Product Category: | Resistors |
Manufacturer: | Ohmite |
Short Description: | RES 12 OHM 3W 1% AXIAL |
More Detail: | 12 Ohms ±1% 3W Through Hole Resistor Axial Wirewo... |
DataSheet: | 43F12RE Datasheet/PDF |
Quantity: | 1000 |
250 +: | $ 0.41310 |
Series: | Ohmicone® 40 |
Packaging: | Bulk |
Part Status: | Active |
Resistance: | 12 Ohms |
Tolerance: | ±1% |
Power (Watts): | 3W |
Composition: | Wirewound |
Features: | -- |
Temperature Coefficient: | ±20ppm/°C |
Operating Temperature: | -- |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.220" Dia x 0.594" L (5.60mm x 15.10mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors are one of the most widely used components on many electronic applications. The 43F12RE is a type of through hole resistor, and it provides a four-terminal connection. It has two end connecting terminals and two further connections that go from side to side.
The 43F12RE is commonly used in many circuits because of its relative small size and relatively low cost. The size of the 43F12RE is typically between 4 mm and 6 mm in width, and between 2 mm and 4 mm in height. The length of the 43F12RE depends on the application, but is typically around 20 to 25 mm in length.
There are a variety of applications for the 43F12RE, including power supply circuits, signal conditioning circuits, audio amplifiers, and analog circuits. In many of these applications, the 43F12RE provides a stable and reliable electrical connection. Additionally, the 43F12RE can be used as a current limiter in some applications, due to its low power consumption.
In terms of working principle, the 43F12RE is a resistor that works by using the Joule effect. This effect states that when a current passes through a conductor, it will generate heat. The amount of heat generated will depend on the voltage across the resistor, the type of material used for the resistor, and the resistance value.
A 43F12RE is typically constructed with a metal-oxide semiconductor (MOS) resistor. The MOS resistor is made up of multiple layers. The first layer is a metal layer which conducts electrical current. The second layer is an oxide layer which is used to form an insulation barrier between the first layer and the third layer. The third layer is a metal layer which is used to provide electrical connection.
The 43F12RE is typically constructed so that the resistance can be adjusted by changing the applied voltage. When a higher voltage is applied, more electrons pass through the resistor, resulting in a higher flow of current. This increases the resistance and decreases the amount of heat generated. When a lower voltage is applied, the flow of current is decreased, resulting in a decrease in the resistance and an increase in the amount of heat generated.
Overall, the 43F12RE is ideal for use in a variety of electronic applications because of its relative small size and low cost. It provides a four-terminal connection and its resistance can be adjusted by changing the applied voltage. The 43F12RE utilizes the Joule effect for working principle, which states that when a current passes through a conductor, it will generate heat. It is typically constructed with a metal-oxide semiconductor resistor, which is made up of multiple layers.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
43F1K0 | Ohmite | 0.53 $ | 1000 | RES 1K OHM 3W 1% AXIAL1 k... |
43F1K1 | Ohmite | 0.53 $ | 1000 | RES 1.1K OHM 3W 1% AXIAL1... |
43F1K2 | Ohmite | 0.53 $ | 1000 | RES 1.2K OHM 3W 1% AXIAL1... |
43F10K | Ohmite | 0.9 $ | 1000 | RES 10K OHM 3W 1% AXIAL10... |
43F10R | Ohmite | 0.5 $ | 1000 | RES 10 OHM 3W 1% AXIAL10 ... |
43F1R0 | Ohmite | 0.61 $ | 1000 | RES 1 OHM 3W 1% AXIAL1 Oh... |
43F12RE | Ohmite | 0.46 $ | 1000 | RES 12 OHM 3W 1% AXIAL12 ... |
43F18RE | Ohmite | 0.46 $ | 1000 | RES 18 OHM 3W 1% AXIAL18 ... |
43F1K8E | Ohmite | 0.48 $ | 1000 | RES 1.8K OHM 3W 1% AXIAL1... |
43F1K5E | Ohmite | 0.48 $ | 1000 | RES 1.5K OHM 3W 1% AXIAL1... |
43F100 | Ohmite | 0.45 $ | 1000 | RES 100 OHM 3W 1% AXIAL10... |
43F120 | Ohmite | 0.45 $ | 1000 | RES 120 OHM 3W 1% AXIAL12... |
43F150 | Ohmite | 0.45 $ | 1000 | RES 150 OHM 3W 1% AXIAL15... |
43F180 | Ohmite | 0.45 $ | 1000 | RES 180 OHM 3W 1% AXIAL18... |
43F1R5E | Ohmite | 0.95 $ | 3340 | RES 1.5 OHM 3W 1% AXIAL1.... |
43F10KE | Ohmite | 1.46 $ | 157 | RES 10K OHM 3W 1% AXIAL10... |
43F10RE | Ohmite | 0.79 $ | 908 | RES 10 OHM 3W 1% AXIAL10 ... |
43F1K2E | Ohmite | 0.83 $ | 1000 | RES 1.2K OHM 3W 1% AXIAL1... |
43F15RE | Ohmite | 0.79 $ | 310 | RES 15 OHM 3W 1% AXIAL15 ... |
43F125E | Ohmite | 0.8 $ | 289 | RES 125 OHM 3W 1% AXIAL12... |
43F150E | Ohmite | 0.8 $ | 247 | RES 150 OHM 3W 1% AXIAL15... |
43F120E | Ohmite | 0.8 $ | 228 | RES 120 OHM 3W 1% AXIAL12... |
43F1K1E | Ohmite | 0.83 $ | 205 | RES 1.1K OHM 3W 1% AXIAL1... |
43F1K0E | Ohmite | 0.83 $ | 29 | RES 1K OHM 3W 1% AXIAL1 k... |
43F1R0E | Ohmite | 0.95 $ | 230 | RES 1 OHM 3W 1% AXIAL1 Oh... |
43F180E | Ohmite | 0.8 $ | 256 | RES 180 OHM 3W 1% AXIAL18... |
43F100E | Ohmite | 0.8 $ | 235 | RES 100 OHM 3W 1% AXIAL10... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...