Allicdata Part #: | 40F300E-ND |
Manufacturer Part#: |
40F300E |
Price: | $ 0.66 |
Product Category: | Resistors |
Manufacturer: | Ohmite |
Short Description: | RES 300 OHM 10W 1% AXIAL |
More Detail: | 300 Ohms ±1% 10W Through Hole Resistor Axial Wire... |
DataSheet: | 40F300E Datasheet/PDF |
Quantity: | 1000 |
250 +: | $ 0.59940 |
Series: | Ohmicone® 40 |
Packaging: | Bulk |
Part Status: | Active |
Resistance: | 300 Ohms |
Tolerance: | ±1% |
Power (Watts): | 10W |
Composition: | Wirewound |
Features: | -- |
Temperature Coefficient: | ±20ppm/°C |
Operating Temperature: | -- |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.406" Dia x 1.902" L (10.30mm x 48.30mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors are a popular and cost effective form of electronic component which offers resistance to an electrical current. A resistor is an electrical device that reduces the amount of electrical current flowing through it by providing a resistance proportionate to the amount of current being passed through. The basic design and construction of a Through Hole Resistor, commonly referred to as a "40F300E", is fairly simple, and offers a long term, reliable means of controlling and managing current.
The 40F300E Through Hole Resistor is a common type used for a variety of applications. These resistors are typically fabricated using high resistance materials, such as alumina and phosphor bronze, and are available in different sizes and wattages. They are typically constructed with a copper wire wrapped around a sturdy, non-combustible material, such as a ceramic substrate. This wire is then insulated with a non-conductive insulation material, such as mica or PTFE, and the ends of the wire are connected to the two leads that form the connection with the circuit board.
The 40F300E Through Hole Resistor offers a wide range of applications, from protection to performance enhancement. In protection mode, these resistors can be used to limit the current flowing through a specific route or circuit in order to provide protection from overloads or spikes in electrical current. On the other hand, they can also be used to provide stability to circuits by correcting any drift in the output of the circuit, much like a filter might. In terms of performance enhancement, these resistors can be used to increase the dynamic range of a circuit, improve the accuracy of a measurement, or reduce the unwanted interference from other components.
The working principle of the 40F300E Through Hole Resistor is fairly straightforward. When electricity passes through the device, it is met with resistance created by the copper wire wrapped around the ceramic substrate. This resistance causes the electrons to slow down, which in turn reduces current flow. The degree of resistance needed can be changed by adjusting the length, thickness, and number of turns in the wire, thereby altering its overall resistance capability.
In conclusion, the 40F300E Through Hole Resistor is a cost-effective and popular form of electronic component commonly used for a wide range of applications. The design and construction are fairly simple, making it an economical choice for many projects. Its working principle is based on providing resistance to the current flow by way of a copper wire wrapped around a ceramic substrate. This resistance can be adjusted to suit the needs of the project, allowing the resistor to be used in protection or performance enhancement applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
40F30KE | Ohmite | 0.86 $ | 1000 | RES 30K OHM 10W 1% AXIAL3... |
40F33KE | Ohmite | 0.95 $ | 1000 | RES 33K OHM 10W 1% AXIAL3... |
40F35KE | Ohmite | 0.95 $ | 1000 | RES 35K OHM 10W 1% AXIAL3... |
40F3R0E | Ohmite | 1.0 $ | 1000 | RES 3 OHM 10W 1% AXIAL3 O... |
40F300E | Ohmite | 0.66 $ | 1000 | RES 300 OHM 10W 1% AXIAL3... |
40F30RE | Ohmite | 0.66 $ | 1000 | RES 30 OHM 10W 1% AXIAL30... |
40F330E | Ohmite | 0.66 $ | 1000 | RES 330 OHM 10W 1% AXIAL3... |
40F33RE | Ohmite | 0.66 $ | 1000 | RES 33 OHM 10W 1% AXIAL33... |
40F350E | Ohmite | 0.66 $ | 1000 | RES 350 OHM 10W 1% AXIAL3... |
40F35RE | Ohmite | 0.66 $ | 1000 | RES 35 OHM 10W 1% AXIAL35... |
40F390E | Ohmite | 0.66 $ | 1000 | RES 390 OHM 10W 1% AXIAL3... |
40F39RE | Ohmite | 0.66 $ | 1000 | RES 39 OHM 10W 1% AXIAL39... |
40F3K0E | Ohmite | 0.7 $ | 1000 | RES 3K OHM 10W 1% AXIAL3 ... |
40F3K3E | Ohmite | 0.7 $ | 1000 | RES 3.3K OHM 10W 1% AXIAL... |
40F3K5E | Ohmite | 0.7 $ | 1000 | RES 3.5K OHM 10W 1% AXIAL... |
40F3K9E | Ohmite | 0.7 $ | 1000 | RES 3.9K OHM 10W 1% AXIAL... |
40F3K0 | Ohmite | 0.76 $ | 1000 | RES 3K OHM 10W 1% AXIAL3 ... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...