40F33KE Allicdata Electronics
Allicdata Part #:

40F33KE-ND

Manufacturer Part#:

40F33KE

Price: $ 0.95
Product Category:

Resistors

Manufacturer: Ohmite
Short Description: RES 33K OHM 10W 1% AXIAL
More Detail: 33 kOhms ±1% 10W Through Hole Resistor Axial Wire...
DataSheet: 40F33KE datasheet40F33KE Datasheet/PDF
Quantity: 1000
250 +: $ 0.86400
Stock 1000Can Ship Immediately
$ 0.95
Specifications
Series: Ohmicone® 40
Packaging: Bulk 
Part Status: Active
Resistance: 33 kOhms
Tolerance: ±1%
Power (Watts): 10W
Composition: Wirewound
Features: --
Temperature Coefficient: ±20ppm/°C
Operating Temperature: --
Package / Case: Axial
Supplier Device Package: Axial
Size / Dimension: 0.406" Dia x 1.902" L (10.30mm x 48.30mm)
Height - Seated (Max): --
Number of Terminations: 2
Failure Rate: --
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are important to electronic devices, as they help regulate the amount of current flow in electrical circuits. The 40F33KE application field and working principle is a particular type of through hole resistor, and is designed specifically for the high reliability and low value of resistance over temperature, time and voltage variations.

Design Specifications

The 40F33KE (photoflash) Through Hole Resistor is designed to meet safety and performance specifications of MIL-V-11138, the Military Specification. The design configuration is a Cylinder Resistor. The 40F33KE resistor body is made of a molded plastic, and has aluminum-oxide (aluminum oxide, also known as alumina) ceramic and film lateral caps, with pre-applied; terminated leads, and an overall ceramic coating. The value of the resistor, which is an important design specification for any type of resistor, is determined by the level of resistance offered by the resistor itself; in this case, the resistance range is from 0.5 to 5 Ohms. The 40F33KE resistor also ensures a 10 Amp current rating over the resistance range for up to 10 sec duration.

Resistance Variability

The 40F33KE resistor provides resistance stability over voltage, temperature, and time conditions. The resistor exhibits dimensions of figure E-910, which is referred to as "Teardrop," which prevents it from shaking and dissipating, which in turn provides stability even during temperature changes. In addition, it has great stability even in terms of the maximum voltage, meaning that it provides reliable service even when applied with higher voltages (400 Volts maximum). The 40F33KE resistor also exhibits temperature coefficient, which plays an important role in its resistance stability.

Voltage Protection Mechanism

The 40F33KE resistor consists of two intermediate stress media within the resistance body, one in between the center of the resistance body and the lead screw, and the other in between the lead screw and the lead that extends out of the resistance body. These two stress media are responsible for protecting the resistor against voltage or current overshoot. This protection helps to maintain the integrity of the unit and prolong its life. The 40F33KE resistor also offers a high degree of noise immunity due to its low impedance, which helps prevent false readings and noise from entering into the resistance body.

Applications

The 40F33KE resistor is widely used in audio systems, amplifiers, and other devices located in TV sets, radio broadcast systems, television transmission towers, and other telecom equipment. The resistor is also used for flash photography in cameras, and to ensure that photographers capture the best possible images in a flash. Additionally, 40F33KE resistors provide reliable performance in temperature monitoring, heat control systems, and many other applications that require reliability under stress and fluctuating performance.

Conclusion

The 40F33KE application field and working principle have been designed to provide reliable performance in applications that require high reliability and low value of resistance over temperature, time and voltage variations. The resistor is designed to meet military specifications, and its features of strong resistance stability, high voltage rating, and superior noise immunity make it ideal for use in a wide variety of applications.

The specific data is subject to PDF, and the above content is for reference

Related Products
Search Part number : "40F3" Included word is 17
Part Number Manufacturer Price Quantity Description
40F30KE Ohmite 0.86 $ 1000 RES 30K OHM 10W 1% AXIAL3...
40F33KE Ohmite 0.95 $ 1000 RES 33K OHM 10W 1% AXIAL3...
40F35KE Ohmite 0.95 $ 1000 RES 35K OHM 10W 1% AXIAL3...
40F3R0E Ohmite 1.0 $ 1000 RES 3 OHM 10W 1% AXIAL3 O...
40F300E Ohmite 0.66 $ 1000 RES 300 OHM 10W 1% AXIAL3...
40F30RE Ohmite 0.66 $ 1000 RES 30 OHM 10W 1% AXIAL30...
40F330E Ohmite 0.66 $ 1000 RES 330 OHM 10W 1% AXIAL3...
40F33RE Ohmite 0.66 $ 1000 RES 33 OHM 10W 1% AXIAL33...
40F350E Ohmite 0.66 $ 1000 RES 350 OHM 10W 1% AXIAL3...
40F35RE Ohmite 0.66 $ 1000 RES 35 OHM 10W 1% AXIAL35...
40F390E Ohmite 0.66 $ 1000 RES 390 OHM 10W 1% AXIAL3...
40F39RE Ohmite 0.66 $ 1000 RES 39 OHM 10W 1% AXIAL39...
40F3K0E Ohmite 0.7 $ 1000 RES 3K OHM 10W 1% AXIAL3 ...
40F3K3E Ohmite 0.7 $ 1000 RES 3.3K OHM 10W 1% AXIAL...
40F3K5E Ohmite 0.7 $ 1000 RES 3.5K OHM 10W 1% AXIAL...
40F3K9E Ohmite 0.7 $ 1000 RES 3.9K OHM 10W 1% AXIAL...
40F3K0 Ohmite 0.76 $ 1000 RES 3K OHM 10W 1% AXIAL3 ...
Latest Products
SQM700JB-68K

RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...

SQM700JB-68K Allicdata Electronics
SQM700JB-1R3

RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...

SQM700JB-1R3 Allicdata Electronics
RNC60J24R9FSB14

RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...

RNC60J24R9FSB14 Allicdata Electronics
RWR89S2R80DRS70

RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...

RWR89S2R80DRS70 Allicdata Electronics
RNC60J7503FSB14

RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...

RNC60J7503FSB14 Allicdata Electronics
RWR81S3400FSB12

RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...

RWR81S3400FSB12 Allicdata Electronics