RLR32C6042FRRSL

Series:	Military, MIL-PRF-39017/03, RLR32
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	60.4 kOhms
Tolerance:	±1%
Power (Watts):	1W
Composition:	Metal Film
Features:	Military, Moisture Resistant, Weldable
Temperature Coefficient:	±100ppm/°C
Operating Temperature:	-65°C ~ 150°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.190" Dia x 0.562" L (4.83mm x 14.27mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	R (0.01%)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole ResistorsThrough hole resistors are electronic components that are used to limit current flow, adjust signal levels, and divide voltages in electrical circuits. One type of through hole resistor is the RLR32C6042FRRSL. The RLR32C6042FRRSL is a 1/4 watt ceramic resistor that is commonly used in any electronic applications used to protect multiple circuits. Its lead-based construction makes it reliable and strong. Plus, it has a large temperature tolerances range, from –55° to +155°C. It also features low load losses and is temperature stable. The RLR32C6042FRRSL is ideal for circuits working at higher frequencies and where reduced noise and higher signal accuracy are required. The RLR32C6042FRRSL is capable of providing a wide range of resistance values starting from 0.1 Ohm to 100K Ohms. Its resistance values also remain stable and consistent throughout its range of temperature. The resistor is also able to support higher currents when a large resistance value is used. When it comes to its applications, the RLR32C6042FRRSL was designed for applications in which it is able to deal with higher current loads. This makes it a great choice for motor protection, transformer protection, industrial control applications, and other circuit protection uses. In order to understand how the RLR32C6042FRRSL works, it is important to understand how it is constructed. The resistor consists of a ceramic substrate with a thin film of metal oxide and two metal leads which are mounted in two holes. The metal oxide film can vary in thickness depending on the type of resistor. When an electric current passes through the metal oxide film, it generates an electric field which induces a current in the metal oxide. The induced current is inversely proportional to the resistance of the resistor. The resistance of the resistor is determined by the width of the metal oxide film, the length of the resistor, and the type of metal oxide used. In conclusion, the RLR32C6042FRRSL is an excellent through hole resistor which is ideal for applications that involve higher current loads. Its lead-based construction, wide resistance values, and high-temperature tolerance make it a reliable and strong component. Its ability to provide a stable resistance throughout its range of temperature and its capacity to support high currents when used with higher resistance values makes it an ideal choice for a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description