RNC60J1470FSB14

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors are one of the most common types of resistors and are found in many electronic circuits. The RNC60J1470FSB14 is a through hole resistor that is a good example of how through hole resistors can be used for both low-power and high-power applications.

The RNC60J1470FSB14 is a type of through hole resistor, meaning that the resistor is mounted inside a hollow tube that has a hole drilled in the center. This type of resistor is commonly used in high-power applications such as power supplies and in low-power applications such as voltage regulators. In low-power applications, the through hole resistor acts as a current-limiting device and prevents the circuit from being overloaded. In high-power applications, the resistor acts as a resistor, controlling the amount of current that is allowed to flow through the circuit.

The RNC60J1470FSB14 offers several advantages over other types of resistors. For example, it is more reliable and durable than surface-mount resistors, which are often used in high-power applications. It is also easier to install since it does not require a specialized set of tools. Additionally, it is easier to inspect the resistor once it is installed since it is always visible, unlike surface-mount resistors which are hidden under the circuit boards.

The RNC60J1470FSB14 is based on a standard Ohm’s law capacitor in parallel configuration. In this configuration, the resistor is placed inside of the capacitor and the two components are separated by a thin insulating sheet that serves as a barrier between the two. This allows for current to flow in only one direction through the resistor, depending on the voltage applied across the capacitor. The high resistance of the resistor prevents excessive current flow, ensuring that it does not become damaged during operation and providing extra protection for the circuit.

The RNC60J1470FSB14 is very reliable and has a long life. It is rated for up to 15 amperes of current and can endure temperatures of up to 200°C before needing to be replaced. It is also resistant to vibration and moisture, making it suitable for a wide range of high-power and low-power applications.

Overall, the RNC60J1470FSB14 is a very reliable through hole resistor that is suitable for both high-power and low-power applications. The resistor is very reliable and durable and offers protection to the circuit against overloading. Additionally, it is easier to install and inspect than surface-mount resistors, making it an ideal choice for electronic circuits.

The specific data is subject to PDF, and the above content is for reference