RP15-243.3SOF/P

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC–DC converters are power conversion devices used to convert DC voltage levels from one voltage to another, for different load applications. The RP15-243.3SOF/P is a high power, non-isolated power factor corrected switched-mode DC–DC converter with a very high frequency. It is designed with a 15-V input voltage range and a 0.7-to-50 V/A adjustable output voltage range.

The main feature of the RP15-243.3SOF/P is its very low ripple and high efficiency. It includes a sophisticated current-mode feedback loop, ultra low output ripples and an additional sub-feedback loop for improving dynamic response and control frequency. It also contains a synchronous rectification method, which greatly reduces power losses, resulting in a much higher efficiency than linear converters.

The RP15-243.3SOF/P can be used in a wide range of applications, from industrial automation and process measurement systems to communication systems and automobile electronics. It can be used to provide a constant and reliable power supply for DC motor control, digital switching, signal conditioning, and telecommunication equipment.

The operating principle of the RP15-243.3SOF/P converter is based on the buck-boost topology, a type of DC–DC converter. This topology enables high accuracy, good transient response and high efficiency. The converter includes a transformer, a rectifier, and a pair of switches. When one switch is off, the other one is on, and vice versa.

First, the transformer transfers the input voltage to the primary winding. A rectifier in the primary circuit then changes the alternating current from the primary winding to direct current. The transformer then transfers the direct current to the secondary winding, and the secondary rectifier converts the alternating current from the secondary winding to direct current.

The direct current from the rectifier is then modulated by the switch. The result of this modulation is that when one switch is on, the other one is off, and vice versa. The result is a transfer of energy from the power source to the load. This process is repeated continuously, and the ripple voltage is significantly reduced due to the high frequency of the switching process.

The RP15-243.3SOF/P converter has a wide input voltage range which allows it to be used in many different applications. It is also designed to be efficient and reliable, and is capable of delivering relatively high power without exceeding specified operating temperatures. The low ripple voltage also ensures minimal noise and power loss.

Overall, the RP15-243.3SOF/P DC–DC converter is a very reliable and efficient device that is ideal for applications requiring high power, low ripple voltage, and a wide input voltage range. It is designed to be used in medium-to-high power industrial automation and process measurement systems, communication systems, and automobile electronics. It is an excellent choice for any application requiring efficient and reliable power conversion.

The specific data is subject to PDF, and the above content is for reference