RP30-4805DFW/N

Series:	POWERLINE RP30-FW
Packaging:	Tube
Part Status:	Active
Type:	Isolated Module
Number of Outputs:	2
Voltage - Input (Min):	18V
Voltage - Input (Max):	75V
Voltage - Output 1:	5V
Voltage - Output 2:	-5V
Voltage - Output 3:	--
Current - Output (Max):	3A, 3A
Power (Watts):	30W
Voltage - Isolation:	1.6kV
Applications:	ITE (Commercial)
Features:	Remote On/Off, OCP, OVP, SCP
Operating Temperature:	-40°C ~ 85°C
Efficiency:	88%
Mounting Type:	Through Hole
Package / Case:	6-DIP Module
Size / Dimension:	2.00" L x 1.00" W x 0.40" H (50.8mm x 25.4mm x 10.2mm)
Control Features:	Enable, Active Low

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC DC converters are devices that take direct current (DC) and convert it into an alternating current (AC) of different ratio. They are used in numerous applications, from providing power to computers and other electronic devices to controlling and charging batteries. The most common DC DC converters are step-down converters; however, step-up, boosting, and inverting converters are also available for specific applications.The RP30-4805DFW/N is a type of DC-DC converter, designed for use in high-frequency application fields. It is a non-isolated, step-down DC-DC voltage regulator. The device is a pulse width modulation (PWM) type of DC-DC converter, designed to convert the input voltage into a regulated output voltage of 5V. It is a high-efficiency buck (step-down) DC-DC converter, with a wide input voltage operating range of 8 to 36 volts.The main working principle of the RP30-4805DFW/N is switching regulator. It works by turning the transistor on and off in rapid succession creating a pulsing signal. This switching action is controlled by an on-board integrated circuit (IC), which is programmed to adjust the duty cycle of the output voltage according to the input voltage. The change in the duty cycle allows it to regulate the output voltage and also increases the efficiency of the device.The RP30-4805DFW/N is typically used in applications where a specific output voltage is needed. The device is ideal for powering onboard digital logic systems, including computer monitors, projectors, routers, and other types of computer systems. It is also suitable for powering LED lighting systems, consumer electronics such as radios and TVs, and other equipment requiring a reliable and consistent 5V power supply.The advantages of using the RP30-4805DFW/N are its high-efficiency rate, wide input voltage range, and low ripple. The device can efficiently deliver up to 30A of output current and has a minimal voltage ripple of ≤3mV. Its wide input voltage range makes it suitable for use in both fixed voltage and variable voltage applications. Furthermore, the device features integrated over-current protection, temperature protection, and short-circuit protection for improved safety. The RP30-4805DFW/N DC-DC converter provides many benefits and has become a popular choice for applications requiring a reliable DC-DC voltage regulator. With its high-efficiency, wide input voltage range, and low ripple, it can be an ideal choice for powering a wide range of computer systems, LED lighting systems, and other consumer electronics.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description