VI-JNJ-EX Allicdata Electronics
Allicdata Part #:

VI-JNJ-EX-ND

Manufacturer Part#:

VI-JNJ-EX

Price: $ 78.14
Product Category:

Power Supplies - Board Mount

Manufacturer: Vicor Corporation
Short Description: DC DC CONVERTER 36V 75W
More Detail: Isolated Module DC DC Converter 1 Output 36V 2....
DataSheet: VI-JNJ-EX datasheetVI-JNJ-EX Datasheet/PDF
Quantity: 1000
1 +: $ 71.03250
Stock 1000Can Ship Immediately
$ 78.14
Specifications
Series: VI-J00™
Packaging: Bulk 
Part Status: Active
Type: Isolated Module
Number of Outputs: 1
Voltage - Input (Min): 36V
Voltage - Input (Max): 76V
Voltage - Output 1: 36V
Voltage - Output 2: --
Voltage - Output 3: --
Current - Output (Max): 2.08A
Power (Watts): 75W
Voltage - Isolation: 3kV
Applications: ITE (Commercial)
Features: OCP, SCP
Operating Temperature: -10°C ~ 100°C
Efficiency: 88%
Mounting Type: Through Hole
Package / Case: Half Brick
Size / Dimension: 2.28" L x 2.40" W x 0.50" H (57.9mm x 70.0mm x 12.7mm)
Base Part Number: VI-JNJ
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters have been around for decades, but the VI-JNJ-EX converter is the latest in a line of DC DC converters that provide a more efficient, and cost effective way of taking power from one voltage source and converting it into another. The VI-JNJ-EX converter is a highly efficient, full-wave rectifier that adopts a flyback topology. It is capable of stepping down as well as stepping up voltage sources so that low-voltage devices can use the same power source as more high-voltage devices.

The VI-JNJ-EX is designed to operate as both a buck and boost converter. A buck converter reduces the input voltage, while a boost converter increases it. This allows users to tailor the voltage output to the needs of the device. This is done by adjusting the duty cycle of the converter, which is simply the ratio of "on time" to "off time" of the switch.

The VI-JNJ-EX runs at a fixed frequency and typically uses a PWM (pulse width modulation) control. This helps reduce the size of the inductor required by the circuit, since the peak inductor current is no longer limited by the input voltage. This also helps to reduce the total power loss in the circuit since the PWM switching frequencies are much higher than the frequency of the input supply.

The VI-JNJ-EX also features a variety of protection circuits. Over-current protection will shut off the power if the current draw of the system exceeds the limits and over-voltage protection will prevent the output voltage from exceeding a predetermined level. This helps to protect both the device and the power supply from damage due to excessive input/output voltages.

The VI-JNJ-EX also offers a number of optional features. These include a temperature sensing circuit that is used to limit output current during high temperature conditions, and a soft-start feature to reduce the inrush of current during startup. This reduces the risk of damaging components due to inrush currents.

The VI-JNJ-EX also includes a shutdown circuit which will disable the converter if the input/output voltage or the temperature exceeds a predetermined level. This ensures that the power supply remains safe and that the device connected to it will not be damaged in the event of an emergency.

The VI-JNJ-EX also features an adjustable voltage reference which allows users to fine-tune the output voltage of the converter for optimal performance. This makes it possible to adjust the converter for different voltage requirements and can also be used to fine tune the performance of the device connected to it.

In conclusion, the VI-JNJ-EX is an advanced DC DC converter that provides a reliable, efficient, and cost-effective way of taking power from one voltage source and converting it into another. It offers a variety of features including adjustable voltage references, temperature sensing, and protection circuits that make the VI-JNJ-EX an ideal option for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference

Latest Products
AEQ20B48N-6L

DC DC CONVERTER 12V 240WIsolated Module ...

AEQ20B48N-6L Allicdata Electronics
AEQ20B48-L

DC DC CONVERTER 12V 240WIsolated Module ...

AEQ20B48-L Allicdata Electronics
AEQ20B48-6L

DC DC CONVERTER 12V 240WIsolated Module ...

AEQ20B48-6L Allicdata Electronics
AEO40Y48N-6L

DC DC CONVERTER 1.8V 120WIsolated Module...

AEO40Y48N-6L Allicdata Electronics
AEO40Y48-L

DC DC CONVERTER 1.8V 120WIsolated Module...

AEO40Y48-L Allicdata Electronics
AEO40Y48-6L

DC DC CONVERTER 1.8V 120WIsolated Module...

AEO40Y48-6L Allicdata Electronics