Allicdata Part #: | VI-22P-EX-ND |
Manufacturer Part#: |
VI-22P-EX |
Price: | $ 95.05 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 13.8V 75W |
More Detail: | Isolated Module DC DC Converter 1 Output 13.8V ... |
DataSheet: | VI-22P-EX Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 86.41080 |
Series: | VI-200™ |
Packaging: | Bulk |
Part Status: | Active |
Type: | Isolated Module |
Number of Outputs: | 1 |
Voltage - Input (Min): | 21V |
Voltage - Input (Max): | 56V |
Voltage - Output 1: | 13.8V |
Voltage - Output 2: | -- |
Voltage - Output 3: | -- |
Current - Output (Max): | 5.43A |
Power (Watts): | 75W |
Voltage - Isolation: | 3kV |
Applications: | ITE (Commercial) |
Features: | OCP, OTP, OVP, SCP |
Operating Temperature: | -10°C ~ 85°C |
Efficiency: | 88% |
Mounting Type: | Through Hole |
Package / Case: | Full Brick |
Size / Dimension: | 4.60" L x 2.40" W x 0.50" H (116.8mm x 61.0mm x 12.7mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC Converters
VI-22P-EX application field and working principle
DC DC converters are electronic components used to convert direct current (DC) from one voltage to another. In many applications, DC DC converters are used to provide power to electrical devices from a power source or to provide power to different systems with different voltage requirements. VI-22P-EX is a kind of DC DC converter. It can be used to convert DC voltage from 12V to 24V, and can provide output current up to 2A.
The VI-22P-EX uses a switching method based on pulse width modulation (PWM) to provide a clean and efficient DC power conversion. This type of DC DC converter uses a simple two-stage topology to convert a single DC voltage into another. It consists of two main stages, a main power stage and an optional control stage. The main power stage consists of two power transistors that switch an inductor storing energy as a current in a loop to achieve the required output voltage. The inductor is connected to the input voltage and the output of the DC – DC converter. The control stage, which is not essential in high voltage components, controls the voltage and current of the output voltage.
There are many application fields of the VI-22P-EX. In automotive electronics, it can be used to convert the relatively low voltage of car battery (typically ~12V) to a higher voltage to provide power for more demanding automotive components. It is also suitable for applications requiring high current from a single power source, such as portable electronics, medical devices and robotics. In addition, the versatile VI-22P-EX can also be used to build a DC power distribution system, making it an ideal choice for many applications.
The VI-22P-EX is suitable for a variety of applications due to its high efficiency, low ripple, clean power and good cost performance. It is highly reliable, with built-in protection functions such as over-voltage protection and over-current protection, to ensure the safety of the system in all conditions. The electronics industry is increasingly using the VI-22P-EX due to its versatility, performance and cost benefits.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...