VE-BT4-EW

Series:	VE-200™
Packaging:	Bulk
Part Status:	Active
Type:	Isolated Module
Number of Outputs:	1
Voltage - Input (Min):	66V
Voltage - Input (Max):	160V
Voltage - Output 1:	48V
Voltage - Output 2:	--
Voltage - Output 3:	--
Current - Output (Max):	2.08A
Power (Watts):	100W
Voltage - Isolation:	3kV
Applications:	ITE (Commercial)
Features:	OCP, OTP, OVP, SCP
Operating Temperature:	-10°C ~ 85°C
Efficiency:	88%
Mounting Type:	Through Hole
Package / Case:	Full Brick
Size / Dimension:	4.60" L x 2.40" W x 0.50" H (116.8mm x 61.0mm x 12.7mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

A DC-DC converter is a device that enables the conversion of direct current (DC) power from one voltage level to a higher or lower voltage level. It is used to increase or decrease the voltage to match the load. The most common application for a DC-DC converter are battery chargers, motor speed control, solar energy systems, and notebook computers.The most common type of DC-DC converter is the switched-mode power supply (SMPS). This type of converter is the most versatile and efficient type of converter. It is capable of producing regulated voltage levels over a wide range of input voltage levels and can provide current up to 400A.The VE-BT4-EW is a low cost, high power, DC/DC converter module. It is designed to convert 12V DC voltage to 24V DC voltage. It has an integrated high efficiency switching circuit with synchronous rectification and is also capable of providing up to 500A of output current.The VE-BT4-EW is built with a patented synchronous rectification circuit to provide efficiency greater than 95%. This allows the device to output higher power levels at a lower cost. It is also capable of operating over a wide range of input voltages from 9V to 18V, and at up to 500A of output current. This makes it ideal for applications such as motor drives, power supplies, LED lighting, and more.The working principle of the VE-BT4-EW is based on an inductor and a switching circuit. The inductor stores the energy and the switching circuit alternately turns on and off the circuit in order to regulate the output voltage. The switching is controlled by a pulse-width modulated signal which is generated from the field-programmable gate array (FPGA). The FPGA allows the device to be programmed to adjust the output voltage for a particular application.The VE-BT4-EW module features integrated protection circuits to safeguard the device from possible fault conditions such as over-voltage and short circuit. It also provides a wide temperature range of operation between -40°C and +105°C.The VE-BT4-EW is an ideal DC/DC converter solution for a wide range of applications. It is easy to use and can provide a regulated voltage output with efficiency greater than 95%. The device is also characterized by a wide operating temperature range and integrated protection circuits for fault conditions.

The specific data is subject to PDF, and the above content is for reference