V24A12E300BG3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC–DC converters are electrical circuits which change one form of electrical energy to another, often converting lower voltage to higher voltage, although some circuits also do the opposite. The V24A12E300BG3 is one of the numerous circuits available on the market, and it is capable of providing an output current of 1 to 24 volts from an input of 12 volts. Enclosed in a slim 2.4 x 1.4 x 0.6 inch (61 x 36 x 15 mm) casing, the V24A12E300BG3 is specifically designed for applications that require high power levels, such as water and beverage vending machines, laser printers, vending machines, medical equipment, and automotive battery charging systems.

The V24A12E300BG3 is a step up DC–DC converter, meaning it takes 12 volts as input and outputs 24 volts. It has a peak power capability of 30 watts, meaning it can output up to 30 watts of power, with an efficiency rate of up to 80%. It is fitted with a very wide input voltage range, meaning it can take a minimum input of 8 volts and a maximum input of 40 volts DC. The V24A12E300BG3 is protected from short circuit, overcurrent, and thermal overloads. It is also fitted with a soft start circuit which eases the current draw during start up and eliminates the possibility of in-rush current flowing into the load circuit. This is especially important in circuits with sensitive components, such as medical equipment.

The internal circuitry of the V24A12E300BG3 is based on a classic Buck/Boost converter topology, with a differential amplifier and the P-Channel and N-Channel MOSFET. The differential amplifier compares the output voltage of the V24A12E300BG3 with a set reference voltage, then the P-Channel, and N-Channel MOSFETs open and close to provide a buck or boost current depending on the voltage difference. The V24A12E300BG3 provides an adjustable ripple rejection ratio (input and output of 75db) providing a very clean regulated output.

The V24A12E300BG3 is an all-purpose DC–DC converter that can be used in a variety of applications that require a high power output. Its wide input voltage range makes it suitable for use with a wide range of power sources, from simple wall outlets to automotive batteries. Its efficient buck/boost design ensures a high performance and reliable power output, even under very high loads. It is also protected from currents, making it perfect for medical and industrial applications where reliability and performance are paramount.

The specific data is subject to PDF, and the above content is for reference