Allicdata Part #: | VI-JWP-EY-F4-ND |
Manufacturer Part#: |
VI-JWP-EY-F4 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 13.8V 50W |
More Detail: | Isolated Module DC DC Converter 1 Output 13.8V ... |
DataSheet: | VI-JWP-EY-F4 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | VI-J00™ |
Packaging: | Bulk |
Part Status: | Active |
Type: | Isolated Module |
Number of Outputs: | 1 |
Voltage - Input (Min): | 18V |
Voltage - Input (Max): | 36V |
Voltage - Output 1: | 13.8V |
Voltage - Output 2: | -- |
Voltage - Output 3: | -- |
Current - Output (Max): | 3.62A |
Power (Watts): | 50W |
Voltage - Isolation: | 3kV |
Applications: | ITE (Commercial) |
Features: | OCP, SCP |
Operating Temperature: | -10°C ~ 100°C |
Efficiency: | 88% |
Mounting Type: | Through Hole |
Package / Case: | Half Brick |
Size / Dimension: | 2.28" L x 1.86" W x 1.04" H (57.9mm x 47.2mm x 26.4mm) |
Base Part Number: | VI-JWP |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are a type of electrical device used to convert DC energy from one voltage level to another. They are often used to provide a stable and adjustable voltage for industrial, military, and consumer applications. VI-JWP-EY-F4 DC-DC converters are a type of converter widely used in the commercial, industrial, military, and aerospace sectors. This article will discuss the application field and working principle of VI-JWP-EY-F4 DC-DC converters.
Application Field
VI-JWP-EY-F4 DC-DC converters are commonly used in a variety of applications. These include power supplies, motor drives, UPS systems, telecom devices, medical equipment, and consumer electronic devices. Due to the wide range of application fields, these converters are available in different power ratings and voltage levels to fit the specific power requirements of different applications.
Working Principle
VI-JWP-EY-F4 DC-DC converters are designed to convert a specific DC voltage level to another voltage level. This process is achieved by using a switching mechanism that causes a DC voltage to be converted into AC voltage, and then rectified back to a DC voltage of the desired level. The switching mechanism, usually a high power semiconductor device, is triggered at specific intervals through the use of a PWM (Pulse Width Modulation) or PFM (Pulse Frequency Modulation) control circuit. As the switching device is switched on and off, the desired voltage level is produced.
VI-JWP-EY-F4 DC-DC converters offer a wide range of benefits, such as very high efficiency, small size, compact design, high reliability, and wide input voltage range. These converters are available in a variety of form factors and with different kinds of features.
Conclusion
VI-JWP-EY-F4 DC-DC converters are a type of DC-DC converter that is widely used in the commercial, industrial, military, and aerospace sectors. These converters are used to convert a specific DC voltage level to another voltage level and offer a wide range of benefits. Understanding the application field and the working principle of these converters is important in order to properly use them in different applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...