Allicdata Part #: | VI-JWF-CY-F2-ND |
Manufacturer Part#: |
VI-JWF-CY-F2 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 72V 50W |
More Detail: | Isolated Module DC DC Converter 1 Output 72V 69... |
DataSheet: | VI-JWF-CY-F2 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Power (Watts): | 50W |
Voltage - Isolation: | 3kV |
Applications: | ITE (Commercial) |
Features: | OCP, SCP |
Operating Temperature: | -25°C ~ 100°C |
Efficiency: | 90% |
Mounting Type: | Through Hole |
Package / Case: | Half Brick |
Size / Dimension: | 2.28" L x 1.86" W x 1.04" H (57.9mm x 47.2mm x 26.4mm) |
Base Part Number: | VI-JWF |
Series: | VI-J00™ |
Packaging: | Bulk |
Part Status: | Active |
Type: | Isolated Module |
Number of Outputs: | 1 |
Voltage - Input (Min): | 18V |
Voltage - Input (Max): | 36V |
Voltage - Output 1: | 72V |
Voltage - Output 2: | -- |
Voltage - Output 3: | -- |
Current - Output (Max): | 694mA |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are used for a wide variety of applications in electrical engineering, in order to convert an electrical signal from one voltage level to another. The VI-JWF-CY-F2 is one such device, a low-power DC-DC converter designed to provide a versatile solution for applications needing a regulated output voltage. It features ultra-low power modes, smart load balancing, and multiphase control.
The primary purpose of the VI-JWF-CY-F2 is to provide an output voltage that is regulated to a certain level regardless of changes in the input voltage. To do this, the device includes an error amplifier, with a feedback loop to control the output voltage. When the voltage on the output pin deviates too far from the target voltage, the error amplifier takes corrective action to bring it back to the desired balanced level.
The VI-JWF-CY-F2 is designed to allow multiple channels of input in order to better control the output voltage. This is done by taking the inputs and combining them into one common output, referred to as “smart load balancing.” This feature allows the device to respond quickly and efficiently to changes in the load, while still providing a consistent output voltage.
In addition to smart load balancing, the VI-JWF-CY-F2 features ultra-low power modes, allowing it to consume minimal power when the input voltage is low. This helps reduce system power requirements and saves energy. The device also includes multiphase control, which allows it to produce more output power with less input power. This feature allows it to be used in applications where power consumption is critical.
The VI-JWF-CY-F2 is a versatile, low-power DC-DC converter with a wide range of applications. It can be used to regulate output voltage, balance loads, or reduce power consumption, making it a valuable addition to any electrical system.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...