| Allicdata Part #: | VE-2N3-CU-F4-ND |
| Manufacturer Part#: |
VE-2N3-CU-F4 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 24V 200W |
| More Detail: | Isolated Module DC DC Converter 1 Output 24V 8.... |
| DataSheet: |  VE-2N3-CU-F4 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Series: | VE-200™ |
| Packaging: | Bulk |
| Part Status: | Active |
| Type: | Isolated Module |
| Number of Outputs: | 1 |
| Voltage - Input (Min): | 36V |
| Voltage - Input (Max): | 76V |
| Voltage - Output 1: | 24V |
| Voltage - Output 2: | -- |
| Voltage - Output 3: | -- |
| Current - Output (Max): | 8.33A |
| Power (Watts): | 200W |
| Voltage - Isolation: | 3kV |
| Applications: | ITE (Commercial) |
| Features: | OCP, OTP, OVP, SCP |
| Operating Temperature: | -25°C ~ 85°C |
| Efficiency: | 90% |
| Mounting Type: | Through Hole |
| Package / Case: | Full Brick |
| Size / Dimension: | 4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC converters are electrical components that convert direct current (DC) from one electrical device to another. The VE-2N3-CU-F4 is a DC DC converter designed to convert voltage from 12-24V to 5V and have an operating current of 2.6A. It is designed for use in automotive, industrial, medical, military, and other applications where reliable power conversion is important.
The VE-2N3-CU-F4 is a DC DC buck-boost converter that can take input voltages from 12V to 24V and convert them to 5V with an efficiency of up to 96%. The converter features reverse polarity protection, short circuit protection, overheat protection and overvoltage protection, all of which make it suitable for use in a wide range of applications.
The main components of the VE-2N3-CU-F4 DC DC converter are a high frequency switching network, a current mode PWM controller, and an output low-pass filter. The switching network consists of two MOSFETs and an inductor. The MOSFETs control the power flow into the load, while the inductor stores and releases energy needed to maintain a constant output voltage. This allows the converter to convert voltage from 12-24V to 5V with an efficiency of up to 96%, despite varying input voltages.
The current mode PWM controller is the heart of the VE-2N3-CU-F4 DC DC converter. It uses pulse width modulation (PWM) techniques to adjust the output voltage to an optimal level. The PWM controller also contains a protection circuit which monitors the output voltage, temperature and input current, and takes corrective action if any of these parameters deviate from the optimal ranges.
The output low-pass filter is designed to filter out noise and ensure a clean output voltage. The filter is also designed to protect the connected device from excessive voltages.
The VE-2N3-CU-F4 is suitable for use in a wide range of applications such as automotive, industrial, medical, and military. Its features make it the ideal choice for reliable power conversion. Its reverse polarity protection, short circuit protection, overheat protection, and overvoltage protection ensure a long operating life and ensure that it can handle the toughest of conditions.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...