VI-JNM-EX-S Allicdata Electronics
Allicdata Part #:

VI-JNM-EX-S-ND

Manufacturer Part#:

VI-JNM-EX-S

Price: $ 0.00
Product Category:

Power Supplies - Board Mount

Manufacturer: Vicor Corporation
Short Description: DC DC CONVERTER 10V 75W
More Detail: Isolated Module DC DC Converter 1 Output 10V 7....
DataSheet: VI-JNM-EX-S datasheetVI-JNM-EX-S Datasheet/PDF
Quantity: 1000
1 +: 0.00000
Stock 1000Can Ship Immediately
$ 0
Specifications
Series: VI-J00™
Packaging: Bulk 
Part Status: Active
Type: Isolated Module
Number of Outputs: 1
Voltage - Input (Min): 36V
Voltage - Input (Max): 76V
Voltage - Output 1: 10V
Voltage - Output 2: --
Voltage - Output 3: --
Current - Output (Max): 7.5A
Power (Watts): 75W
Voltage - Isolation: 3kV
Applications: ITE (Commercial)
Features: OCP, SCP
Operating Temperature: -10°C ~ 100°C
Efficiency: 88%
Mounting Type: Through Hole
Package / Case: Half Brick
Size / Dimension: 2.28" L x 1.80" W x 0.52" H (57.9mm x 45.7mm x 13.2mm)
Base Part Number: VI-JNM
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC to DC Converters

DC to DC converters are a type of electronic power conversion devices that convert a DC voltage level into another. There are various types and configurations of DC to DC converters and each one has its own purpose. One of the most popular types is the VI-JNM-EX-S DC to DC converter.

The VI-JNM-EX-S is a voltage multiplier that is used to convert low-voltage DC power to higher voltages. It performs this task by using a series of rectifiers and capacitors that create a constant voltage output. This type of converter is used in various applications such as medical systems, telecommunications, and renewable energy. It is also used as the primary power source for telecommunications systems.

The VI-JNM-EX-S works by alternating two or more DC sources and combining them into one output voltage. The alternating current sources are then rectified and filtered in order to reduce the ripple across the output voltage. The voltage output is adjusted by a variable resistor, which sets the output voltage at the desired level. The conversion from DC to DC is done in a continuous and highly efficient manner.

The power efficiency of the VI-JNM-EX-S is based on its wide input range and high frequency operation. It has a wide input voltage range of 5-500V and an output range from 5-300V. It is also able to support a wide range of load currents up to 10A. The VI-JNM-EX-S can operate at frequencies up to 60kHz and its high frequency capability allows for reduced circuit size and component count. This makes the VI-JNM-EX-S an ideal solution for applications with minimal size restrictions.

The VI-JNM-EX-S DC to DC converter is able to meet the needs of a variety of applications. It can be used in applications that require efficiently converting low-voltage DC power to higher voltages. It is also suitable for telecommunications, medical systems, renewable energy, and a variety of other applications. This type of DC to DC converter is highly efficient and versatile, making it a great choice for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference

Latest Products
AEQ20B48N-6L

DC DC CONVERTER 12V 240WIsolated Module ...

AEQ20B48N-6L Allicdata Electronics
AEQ20B48-L

DC DC CONVERTER 12V 240WIsolated Module ...

AEQ20B48-L Allicdata Electronics
AEQ20B48-6L

DC DC CONVERTER 12V 240WIsolated Module ...

AEQ20B48-6L Allicdata Electronics
AEO40Y48N-6L

DC DC CONVERTER 1.8V 120WIsolated Module...

AEO40Y48N-6L Allicdata Electronics
AEO40Y48-L

DC DC CONVERTER 1.8V 120WIsolated Module...

AEO40Y48-L Allicdata Electronics
AEO40Y48-6L

DC DC CONVERTER 1.8V 120WIsolated Module...

AEO40Y48-6L Allicdata Electronics