MCP3022.300

Series:	--
Packaging:	Tube
Part Status:	Obsolete
Output Type:	Triac
Zero Crossing Circuit:	No
Number of Channels:	1
Voltage - Isolation:	5300Vrms
Voltage - Off State:	400V
Current - LED Trigger (Ift) (Max):	10mA
Current - Hold (Ih):	200µA
Current - DC Forward (If) (Max):	60mA
Mounting Type:	Through Hole
Package / Case:	6-DIP (0.300", 7.62mm)
Supplier Device Package:	6-DIP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Optoisolators are electrical components that isolate two circuits electrically and optically. They are commonly used to provide optical-isolation in a wide variety of industrial and commercial applications. The MCP3022.300 is a Triac, SCR Output Optoisolator based on Microchip’s MCP3022 optocoupler technology. The device features an open-collector output and is suitable for use in AC and DC applications.

Features of MCP3022.300

The MCP3022.300 features an isolator output that can be simultaneously driven by two independent optocoupler inputs. The device is available in an 8- or 10-pin DIP package and has a wide-range of specifications including a voltage rating of 600Vrms, an isolation voltage of 3000Vrms, a response time of 10µs, and a power dissipation rating of 0.5W. The device also has an operating temperature range of -40 to 100°C.

Applications

The MCP3022.300’s wide-range of features make it suitable for a variety of applications. Some of the most common applications are AC and DC motor control, circuit isolation and protection, industrial relays, IGBTs, motor drives, and power supplies. The device can also be used in process control, solid-state relays, and three-phase AC motor control.

Working principle

The MCP3022.300 optoisolator uses an open-collector output to isolate two circuits. It consists of an LED, which is biased by a current source, and an optocoupler that converts the light into a voltage. When the input signal is applied to the LED, the optocoupler produces a voltage that is proportional to the current applied to the LED. This signal is then passed to the output, resulting in circuit isolation.The optocoupler also provides protection against voltage surges by limiting the current in the output circuit and reducing the risk of electrical shock.

Conclusion

The MCP3022.300 is a Triac, SCR Output Optoisolator ideal for isolating two circuits. It features an open-collector output and has a wide-range of features including a voltage rating of 600Vrms and an isolation voltage of 3000Vrms. The device is highly suitable for use in a variety of applications including AC and DC motor control, circuit isolation and protection, industrial relays, IGBTs, motor drives, and power supplies. The working principle of the device is based on an LED and optocoupler providing circuit isolation by converting the light from the LED into a voltage.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description