VI-J6H-MY-F4 Allicdata Electronics
Allicdata Part #:

VI-J6H-MY-F4-ND

Manufacturer Part#:

VI-J6H-MY-F4

Price: $ 0.00
Product Category:

Power Supplies - Board Mount

Manufacturer: Vicor Corporation
Short Description: DC DC CONVERTER 52V 50W
More Detail: Isolated Module DC DC Converter 1 Output 52V 96...
DataSheet: VI-J6H-MY-F4 datasheetVI-J6H-MY-F4 Datasheet/PDF
Quantity: 1000
1 +: 0.00000
Stock 1000Can Ship Immediately
$ 0
Specifications
Series: VI-J00™
Packaging: Bulk 
Part Status: Active
Type: Isolated Module
Number of Outputs: 1
Voltage - Input (Min): 200V
Voltage - Input (Max): 400V
Voltage - Output 1: 52V
Voltage - Output 2: --
Voltage - Output 3: --
Current - Output (Max): 962mA
Power (Watts): 50W
Voltage - Isolation: 3kV
Applications: ITE (Commercial)
Features: OCP, SCP
Operating Temperature: -55°C ~ 100°C
Efficiency: 90%
Mounting Type: Through Hole
Package / Case: Half Brick
Size / Dimension: 2.28" L x 1.86" W x 1.04" H (57.9mm x 47.2mm x 26.4mm)
Base Part Number: VI-J6H
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC Converters are a type of power supply technology that converts an input voltage of one polarity into an output voltage of a different polarity. They are used in applications that require a low voltage to be converted to a higher voltage, such as automotive, military, and aerospace applications. The VI-J6H-MY-F4 is an isolated, bidirectional DC-DC converter that is capable of converting low input voltage to a higher output voltage. It is designed to provide a regulated output with a low noise signal.

The VI-J6H-MY-F4 consists of two main components: the voltage divider and the power stage. The voltage divider is responsible for dividing the input voltage into two outputs. The outputs from the voltage divider are then used to regulate the output voltage of the power stage. The power stage consists of a transformer, an isolation amplifier, a controlling IC, and several power components. The transformer and isolation amplifier allow for the transfer of energy between the output voltage and the input voltage. The controlling IC then adjusts the output voltage based on the feedback from the voltage divider. The power components are used to provide the necessary current and power to the output of the power stage.

The VI-J6H-MY-F4 is capable of operating in either step-down or buck mode. When operating in the step-down mode, the input voltage is divided into two outputs, with one output being higher than the other. The higher output is then regulated in order to provide the required output voltage. When operating in the buck mode, the input voltage is increased to a higher voltage, and then regulated to provide the required output voltage.

The VI-J6H-MY-F4 can also operate in isolated or non-isolated modes, depending on the application. The isolated mode is typically used in applications where the input voltage must remain isolated from the output voltage, such as power supplies for medical and industrial equipment. The non-isolated mode is typically used in applications where the input voltage can be connected to the output voltage, such as automotive and military applications.

The VI-J6H-MY-F4 can be used in a variety of applications, ranging from automotive and aerospace to medical and industrial equipment. It is designed to provide a high efficiency, low noise conversion of low voltage to a higher voltage. The isolated and buck-boost modes make the VI-J6H-MY-F4 adaptable to a wide range of applications, and its wide input voltage range makes it suitable for both automotive and industrial applications.

The specific data is subject to PDF, and the above content is for reference

Latest Products
AEQ20B48N-6L

DC DC CONVERTER 12V 240WIsolated Module ...

AEQ20B48N-6L Allicdata Electronics
AEQ20B48-L

DC DC CONVERTER 12V 240WIsolated Module ...

AEQ20B48-L Allicdata Electronics
AEQ20B48-6L

DC DC CONVERTER 12V 240WIsolated Module ...

AEQ20B48-6L Allicdata Electronics
AEO40Y48N-6L

DC DC CONVERTER 1.8V 120WIsolated Module...

AEO40Y48N-6L Allicdata Electronics
AEO40Y48-L

DC DC CONVERTER 1.8V 120WIsolated Module...

AEO40Y48-L Allicdata Electronics
AEO40Y48-6L

DC DC CONVERTER 1.8V 120WIsolated Module...

AEO40Y48-6L Allicdata Electronics