ACFL-6211T-000E Isolators

Number of Channels:	2
Inputs - Side 1/Side 2:	1/1
Voltage - Isolation:	5000Vrms
Common Mode Transient Immunity (Min):	15kV/µs
Input Type:	DC
Output Type:	Push-Pull, Totem Pole
Current - Output / Channel:	10mA
Data Rate:	15MBd
Propagation Delay tpLH / tpHL (Max):	35ns, 35ns
Rise / Fall Time (Typ):	10ns, 10ns
Voltage - Forward (Vf) (Typ):	1.5V
Current - DC Forward (If) (Max):	20mA
Voltage - Supply:	3 V ~ 5.5 V
Operating Temperature:	-40°C ~ 125°C
Mounting Type:	Surface Mount
Package / Case:	12-BSOP (0.295", 7.50mm Width)
Supplier Device Package:	12-SO
Series:	Automotive, AEC-Q100, R²Coupler™
Packaging:	Tube
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Logic OutputThe ACFL-6211T-000E is an optoisolator that is designed to provide high voltage isolation in circuits for logic switching applications. It provides an ideal solution for any application where electrical noise or the possibility of voltage transients are present. It features a gallium arsenide infrared LED coupled with a silicon phototransistor on one side and a logic output on the other side. The ACFL-6211T-000E consists of a logic isolator in an isolated package consisting of a pair of opto isolator components - a LED (light-emitting diode) and a phototransistor - connected by the common lead. The LED is used as a logic gate to switch the incoming signal. The incoming signal is transformed into an electrical signal by the LED and the phototransistor is used to detect the light generated by the LED and to convert it into an electrical signal.The light generated by the LED passes through an insulation gap to the phototransistor, which converts it back into an electrical output signal. The isolated output can be used to control a variety of electronic circuits, including logic circuits, power circuits and motor controls.The optoisolators are used in many different applications. They can be used to switch between circuits and provide a means of isolating electrical noise from the incoming signals. This type of optoisolator is often used in data communication networks and in other areas where high voltage isolation is needed.The ACFL-6211T-000E can be used in a variety of ways, including as a two-way switch to control logic gates, as a four-way switch and even as an analog switch. It is capable of handling input signals at voltage levels from 0V to 5V. It also has a wide array of operating temperatures, from -40°C / +125°C.The ACFL-6211T-000E is ideal for applications where the speed and efficiency of electrical isolation is a must. It uses a unique optoisolator construction, which enables it to provide high voltage isolation and excellent signal integrity. It also features robust protection against over voltage and temperature damage.The ACFL-6211T-000E optoisolator is designed to be used in applications with high voltage transients or in noisy environments. Its robust design provides an added layer of protection against electrical noise or transient voltage and helps to ensure reliable operation in such environments. In addition, it is capable of handling input signals at high voltages up to 5V.The ACFL-6211T-000E optoisolator offers a wide range of advantages over its rivals. It is relatively inexpensive, lightweight and easily installed. It is also capable of handling multiple logic signals, making it ideal for applications where isolation is needed for multiple inputs.In conclusion, the ACFL-6211T-000E optoisolator is a cost effective and reliable solution for applications requiring high voltage isolation and reliable operation in noisy environments. Its robust design and wide input voltage range make it suitable for a range of applications, from logic switching to motor control.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description