FODM8801C

Series:	OptoHit™
Packaging:	Tube
Part Status:	Active
Number of Channels:	1
Voltage - Isolation:	3750Vrms
Current Transfer Ratio (Min):	200% @ 1mA
Current Transfer Ratio (Max):	400% @ 1mA
Turn On / Turn Off Time (Typ):	6µs, 6µs
Rise / Fall Time (Typ):	5µs, 5.5µs
Input Type:	DC
Output Type:	Transistor
Voltage - Output (Max):	75V
Current - Output / Channel:	30mA
Voltage - Forward (Vf) (Typ):	1.35V
Current - DC Forward (If) (Max):	20mA
Vce Saturation (Max):	400mV
Operating Temperature:	-40°C ~ 125°C
Mounting Type:	Surface Mount
Package / Case:	4-SOIC (0.173", 4.40mm Width)
Supplier Device Package:	4-Mini-Flat

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

FODM8801C Application Field and Working PrincipleOptoisolators are electrical technologies used to isolate an electrical circuit or system from another. This type of system is especially useful in areas with sensitive electronics which may be damaged if there is an inadvertent electrical connection. Often used in medical, industrial, and military applications, opto-isolators are favored for their ability to block both electrical and biochemical signals, provide electrical insulation, and reduce noise interference.The FODM8801C is a type of opto-isolator and belongs to the Transistor, Photovoltaic Output Category. It is a 4-pin opto-isolator that uses small photovoltaic power sources to provide electrical isolation between two circuits. The device is based on a 1000V power switching technology and is designed for applications in hostile and noisy industrial, telecom, and computing environments.The four pins in the FODM8801C device are for ground, input, output, and light. The input pin connects to the main circuit or device and the output pin is connected to the auxiliary circuit. The light pin provides photovoltaic power and is connected to an LED or other light device. Once powered, the LED sends light to the photovoltaic power source. This light energy is then converted to a small electrical signal which is sent to the output pin. The electrical signal acts as an "opener" and allows electricity to flow from the input pin to the output pin. As a result, electrical signals can either be blocked or opened as necessary in order to isolate the two circuits from one another.The FODM8801C is well-suited for use in both indoor and outdoor applications, and it is designed to meet the needs of demanding industrial applications. It can protect against high currents, voltage spikes, and other environmental conditions that could damage delicate equipment. When used in sensitive medical applications, the opto-isolator can help to keep any electrical signals away from the equipment, personnel or patients. Additionally, the FODM8801C is also capable of blocking digital and analog signals, allowing signals with different frequencies and signals with low DC positive voltage to pass.In conclusion, the FODM8801C is a special type of opto-isolator that can be used to provide electrical isolation between two circuits. Its four pins provide ground, input, output and light connections, allowing it to control the flow of electrical signals and protecting sensitive equipment against high currents. Additionally, the FODM8801C is well-suited for indoor and outdoor industrial, medical, telecom, and computing applications, ensuring that it provides the highest level of electrical isolation.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description