PS9303L2-V-E3-AX

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are optoelectronic devices used to isolate one part of a circuit from another. The PS9303L2-V-E3-AX is a member of this family of isolators, specifically in the Logic Output category. This device is particularly suitable for use in applications that require a locking mechanism for safety purposes, such as overvoltage protection, and in industrial automation.

The PS9303L2-V-E3-AX optoisolator consists of an input section, an optocoupler, and an output section. The input section consists of a logic input that converts the logic signal to an electrical signal which is then transmitted to the optocoupler. The optocoupler couples an infrared emitting diode with a photodetector, thereby transmitting electrical signals without the need for direct physical contact. The output section then converts the electrical signal back to logic, completing the electrical isolation.

The input section of PS9303L2-V-E3-AX accepts digital signals ranging between 0 and 5V, with a minimum operating voltage range from 2.4 to 18V. The maximum high-level logic voltage is 5V and the maximum low-level logic voltage is 0.3V.

The output section of PS9303L2-V-E3-AX is a phototransistor output, which can control large loads of up to 500mA. The maximum on-state voltage is 37V and the maximum current is 500mA. The output is capable of high speed switching of between 0.1 and 8 μs.

The PS9303L2-V-E3-AX has an operating temperature range of -40 to +85°C, and is available in a variety of packages. The most common package is the DIP-6, which enables easy mounting onto a printed circuit board.

The PS9303L2-V-E3-AX is particularly suitable for applications where both electrical isolation and high speed switching are required. In industrial automation, for example, this optoisolator is ideal for use in automated high speed sorting machines. In addition, the use of the optoisolator ensures that the sorting system remains safe, even in the event of an electrical surge or malfunction.

The PS9303L2-V-E3-AX optoisolator is also useful in overvoltage protection applications. By utilizing the optoisolator, it is possible to provide a disconnect with no direct physical contact between the high voltage and low voltage sections. This means that the high voltage side can be shut down in the event of an overvoltage, without affecting the low voltage side.

The PS9303L2-V-E3-AX is an incredibly versatile and reliable optoisolator which can be used in a variety of applications. Its ability to provide both electrical isolation and high-speed switching, combined with its rugged design and reliable performance, make it an excellent choice for industrial applications.

The specific data is subject to PDF, and the above content is for reference