PS9351L2-V-E3-AX

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are specialized components which use light to physically and electrically separate two circuits in device applications. Typically, an optoisolator has two parts, an LED (Light Emitting Diode) and a phototransistor. In the case of logic output optoisolator, PS9351L2-V-E3-AX, the LED will emit infra-red light when switched on by a logic signal. This light is detected by an integrated phototransistor which will then trigger a logic signal. This Infrared light is isolated from the input logic signal, prohibiting any electrical noise from interfering with the output signal.

For many applications it is important that separate parts of a system, or even different systems, communicate without any hardware connections being established between them. This is where optoisolators are ideal, and they can be used in many different settings. The PS9351L2-V-E3-AX is frequently used in industrial settings for applications such as inverters and converters, as well as in computer hardware, such as embedded systems and personal computers.

The logic output PS9351L2-V-E3-AX optoisolator has some key characteristics which define it. These include a working voltage of 12V, a response time of 10µs, a breakdown voltage of 30V and a temperature range of -40°C to +105°C. As with all optoisolators, this device also has a saturation voltage of just 1.4V and a logic output capability of 0.4V.

It is also important to mention the power requirements for a PS9351L2-V-E3-AX device. This optoisolator requires only a low forward current, around 100mA, making it very power efficient. The LED has a high tolerance to power pulses, and is also suitably rated to withstand any reasonable voltage surges or spikes that might occur in some applications.

The most interesting characteristic of a PS9351L2-V-E3-AX optoisolator lies within its logic output capabilities. The device can operate at a fast speed, as the response time is only 10µs. This means that the device can be used for a wide range of digital logic applications, such as control relays, analog to digital conversion, and signal conditioning.

The PS9351L2-V-E3-AX device is designed with a built-in logic level shifter. This means that it can operate in a wide range of voltages, from 12V up to 30V. This makes the device very versatile, and enables it to be used for a number of different applications. The optoisolator can also be used to protect sensitive components from electrostatic discharge (ESD) and over-voltage conditions.

The PS9351L2-V-E3-AX optoisolator is a fast, efficient and versatile device which is ideal for a number of industrial and digital logic applications. It is capable of operating in a variety of voltages and power conditions and also provides protection from ESD and overvoltage conditions. The device offers a high tolerance to power pulses, a low forward current requirement, and fast response time. With its logic level shifter and wide temperature range, the PS9351L2-V-E3-AX optoisolator is the ideal choice for many industrial and digital logic applications.

The specific data is subject to PDF, and the above content is for reference